[V8 PATCH 12/16] usb: gadget: mv_udc: add extern chip support
Chao Xie
chao.xie at marvell.com
Wed Feb 20 23:07:22 EST 2013
Because arch-mmp will make use of irq domain for irq
allocation, the irqs allocated for PMIC is dynamical.
The vbus/idpin irqs from PMIC can not be passed by platform data.
Using the extern chip APIs provides by PHY driver can solve this
problem.
Marvell usb PHY driver provides a middle layer.
The PMIC usb drivers will help to register the callbacks in the
marvell usb PHY driver.
udc/otg/ehci driver will call the callbacks.
Then we do not need pass the information in platform data. It will
remove another block in the way of enabling device tree for usb.
Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
drivers/usb/gadget/mv_udc.h | 3 ++
drivers/usb/gadget/mv_udc_core.c | 56 +++++++++++++++++++++++++-------------
2 files changed, 40 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index f339df4..5d44a6f 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -178,6 +178,9 @@ struct mv_udc {
struct platform_device *dev;
int irq;
+ unsigned int extern_attr;
+ struct notifier_block notifier;
+
struct mv_cap_regs __iomem *cap_regs;
struct mv_op_regs __iomem *op_regs;
unsigned int max_eps;
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 4876d2f..04b4195 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2075,27 +2075,32 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static irqreturn_t mv_udc_vbus_irq(int irq, void *dev)
+static int mv_udc_vbus_notifier_call(struct notifier_block *nb,
+ unsigned long val, void *v)
{
- struct mv_udc *udc = (struct mv_udc *)dev;
+ struct mv_udc *udc = container_of(nb, struct mv_udc, notifier);
/* polling VBUS and init phy may cause too much time*/
- if (udc->qwork)
+ if (udc->qwork && val == EVENT_VBUS)
queue_work(udc->qwork, &udc->vbus_work);
- return IRQ_HANDLED;
+ return 0;
}
static void mv_udc_vbus_work(struct work_struct *work)
{
struct mv_udc *udc;
- unsigned int vbus;
+ struct mv_usb2_phy *mv_phy;
+ unsigned int vbus = VBUS_LOW;
udc = container_of(work, struct mv_udc, vbus_work);
- if (!udc->pdata->vbus)
+ if (!(udc->extern_attr & MV_USB_HAS_VBUS_DETECTION))
+ return;
+
+ mv_phy = container_of(udc->phy, struct mv_usb2_phy, phy);
+ if (mv_usb2_extern_call(mv_phy, vbus, get_vbus, &vbus))
return;
- vbus = udc->pdata->vbus->poll();
dev_info(&udc->dev->dev, "vbus is %d\n", vbus);
if (vbus == VBUS_HIGH)
@@ -2117,11 +2122,17 @@ static void gadget_release(struct device *_dev)
static int mv_udc_remove(struct platform_device *pdev)
{
struct mv_udc *udc;
+ struct mv_usb2_phy *mv_phy;
udc = platform_get_drvdata(pdev);
+ mv_phy = container_of(udc->phy, struct mv_usb2_phy, phy);
+
usb_del_gadget_udc(&udc->gadget);
+ if (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION)
+ mv_usb2_unregister_notifier(mv_phy, &udc->notifier);
+
if (udc->qwork) {
flush_workqueue(udc->qwork);
destroy_workqueue(udc->qwork);
@@ -2149,6 +2160,7 @@ static int mv_udc_probe(struct platform_device *pdev)
{
struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_udc *udc;
+ struct mv_usb2_phy *mv_phy;
int retval = 0;
int clk_i = 0;
struct resource *r;
@@ -2167,6 +2179,7 @@ static int mv_udc_probe(struct platform_device *pdev)
}
udc->done = &release_done;
+ udc->extern_attr = pdata->extern_attr;
udc->pdata = pdev->dev.platform_data;
spin_lock_init(&udc->lock);
@@ -2203,6 +2216,7 @@ static int mv_udc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to map I/O memory\n");
return -EBUSY;
}
+ mv_phy = container_of(udc->phy, struct mv_usb2_phy, phy);
udc->phy = devm_usb_get_phy_dev(&pdev->dev, MV_USB2_PHY_INDEX);
if (IS_ERR_OR_NULL(udc->phy))
@@ -2315,17 +2329,8 @@ static int mv_udc_probe(struct platform_device *pdev)
/* VBUS detect: we can disable/enable clock on demand.*/
if (udc->transceiver)
udc->clock_gating = 1;
- else if (pdata->vbus) {
+ else if (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION) {
udc->clock_gating = 1;
- retval = devm_request_threaded_irq(&pdev->dev,
- pdata->vbus->irq, NULL,
- mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
- if (retval) {
- dev_info(&pdev->dev,
- "Can not request irq for VBUS, "
- "disable clock gating\n");
- udc->clock_gating = 0;
- }
udc->qwork = create_singlethread_workqueue("mv_udc_queue");
if (!udc->qwork) {
@@ -2335,6 +2340,8 @@ static int mv_udc_probe(struct platform_device *pdev)
}
INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
+ udc->notifier.notifier_call = mv_udc_vbus_notifier_call;
+ mv_usb2_register_notifier(mv_phy, &udc->notifier);
}
/*
@@ -2358,6 +2365,9 @@ static int mv_udc_probe(struct platform_device *pdev)
return 0;
err_create_workqueue:
+ if (!udc->transceiver
+ && (udc->extern_attr & MV_USB_HAS_VBUS_DETECTION))
+ mv_usb2_unregister_notifier(mv_phy, &udc->notifier);
destroy_workqueue(udc->qwork);
err_unregister:
device_unregister(&udc->gadget.dev);
@@ -2376,6 +2386,8 @@ err_disable_clock:
static int mv_udc_suspend(struct device *dev)
{
struct mv_udc *udc;
+ struct mv_usb2_phy *mv_phy;
+ unsigned int vbus;
udc = dev_get_drvdata(dev);
@@ -2383,11 +2395,17 @@ static int mv_udc_suspend(struct device *dev)
if (udc->transceiver)
return 0;
- if (udc->pdata->vbus && udc->pdata->vbus->poll)
- if (udc->pdata->vbus->poll() == VBUS_HIGH) {
+ mv_phy = container_of(udc->phy, struct mv_usb2_phy, phy);
+ if ((udc->extern_attr & MV_USB_HAS_VBUS_DETECTION) &&
+ mv_usb2_has_extern_call(mv_phy, vbus, get_vbus)) {
+ if (mv_usb2_extern_call(mv_phy, vbus, get_vbus, &vbus))
+ return -EAGAIN;
+
+ if (vbus == VBUS_HIGH) {
dev_info(&udc->dev->dev, "USB cable is connected!\n");
return -EAGAIN;
}
+ }
/*
* only cable is unplugged, udc can suspend.
--
1.7.4.1
More information about the linux-arm-kernel
mailing list