[RFC PATCH 7/9] thermal: tegra30: add tegra30 thermal driver

Wei Ni wni at nvidia.com
Wed Feb 20 07:23:43 EST 2013


On 02/20/2013 07:48 AM, Stephen Warren wrote:
> On 02/18/2013 04:30 AM, Wei Ni wrote:
>> dd Tegra30 thermal driver support. It create thermal zone with thermal
>> sensors and cooling device to participate in the linux thermal management.
> 
>> diff --git a/drivers/thermal/tegra3_thermal.c b/drivers/thermal/tegra3_thermal.c
> 
>> +struct tegra_thermal_data {
> 
> That's not really "thermal data", but that "thermal zone" or "thermal
> device" itself.
> 
>> +static int
>> +tegra_throttle_set_cur_state(struct thermal_cooling_device *cdev,
>> +				unsigned long cur_state)
>> +{
>> +	struct balanced_throttle *bthrot = cdev->devdata;
>> +	int index;
>> +
>> +	mutex_lock(&cpu_throttle_lock);
>> +
>> +	/* TODO: we will handle the dvfs here */
> 
> That seems like rather a large TODO. We don't have any DVFS support for
> Tegra yet. Is it even worth moving forward with this driver without that?

I think it's better to split this file into two driver, one is for the
thermal sensor, it can read/write temperature. And the other one is for
the cooling device, something like tegra3_cooling .c, it will call dvfs
interface to handle throttling when dvfs is ready.
And by now, we can focus on this tegra3_thermal.c.

> 
>> +struct thermal_cooling_device *balanced_throttle_register(
>> +		struct balanced_throttle *bthrot, char *type)
> 
> What does "balanced" mean here; isn't balanced a governor, whereas this
> driver is simply providing the implementation that an arbitrary governor
> would use to do its will?
> 
> This function also appears to be rather generically named. A consistent
> function/symbol-name prefix of e.g. "tegra30_thermal" would be useful
> throughout the file.

I port these codes from our downstream kernel, I will move them to the
new tegra3_cooling.c, and since the dvfs is not ready, I will remain
simplest codes, and remove the "balanced".
> 
>> +static struct tegra_thermal_data * __devinit thermal_tegra_dt_parse_pdata(
>> +						struct platform_device *pdev)
> 
> I'd like some slight re-structing here.
> 
> Tegra only supports device tree now; no board files (upstream at least,
> which is all that's relevant here). Hence, none of the Tegra drivers
> support platform data at all after the last round of cleanup patches I
> sent on Friday (most of which haven't been checked in yet). Hence, this
> function is not parsing platform data out of DT, it's plain parsing
> device tree.
> 
> So, can you move the devm_kzalloc of the tdata into probe() right at the
> start, rename this function tegra30_thermal_parse_dt(), and call it
> right after allocating "tdata" (which also is more like "tdev" or
> "tzone" perhaps).

Got it, I will change it.

> 
> Downstream if you still need to support platform data, you can simply
> copy the platform data into "tdev" rather than calling
> tegra30_thermal_parse_dt(); a simple patch to carry.
> 
>> +	tdata = devm_kzalloc(&pdev->dev, sizeof(*tdata), GFP_KERNEL);
>> +	if (!tdata) {
>> +		dev_err(&pdev->dev, "Can't allocate platform data\n");
>> +		return NULL;
>> +	}
>> +	memset(tdata, 0, sizeof(*tdata));
> 
> That last line is kinda the whole point of k*z*alloc...

Yes, I forgot to remove it.

> 
>> +
>> +	ret = of_parse_phandle_with_args(np, "sensors", "#sensor-cells", 0,
>> +					&args);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't get sensor.\n");
>> +		return NULL;
>> +	}
>> +	tdata->np_args.np = args.np;
>> +	tdata->np_args.index = args.args[0];
> 
> That lookup should be implemented as part of the thermal core. It
> shouldn't be duplicated in every single driver.
> 
>> +	ret = of_property_read_u32(np, "passive-delay", &val);
>> +	if (!ret)
>> +		tdata->passive_delay = val;
> 
> The DT binding documentation doesn't say this property is optional. If
> you intend it to be, the documentation should say so, and specify what
> the default is if the property is missing.

Ok, I will change it.

> 
>> +	ret = of_property_read_u32(np, "num-passive-trips", &val);
>> +	if (!ret)
>> +		tdata->trip_ext.num_passive_trips = val;
>> +
>> +	if (tdata->trip_ext.num_passive_trips) {
>> +		tdata->trip_ext.passive_trips = devm_kzalloc(&pdev->dev,
>> +						sizeof(int) * val, GFP_KERNEL);
> 
> DT cells are specifically U32 not int. You probably want the driver to
> use U32 instead of int to make 100% sure the range matches.

Ok.

> 
>> +
>> +		of_property_read_u32_array(np, "passive-trips",
>> +				(u32 *)(tdata->trip_ext.passive_trips),
>> +				tdata->trip_ext.num_passive_trips);
> 
> ... and then you wouldn't need this cast!
> 
>> +	}
> 
>> +	of_property_read_u32_array(np, "throt-tab",
>> +				(u32 *)(&tdata->tj_throttle.throt_tab),
>> +				tdata->tj_throttle.throt_tab_size * 2);
> 
> What about error-handling that API call, and all the others?

I will add it.

> 
>> +static int tegra30_thermal_probe(struct platform_device *pdev)
>> +{
>> +	struct tegra_thermal_data *pdata = pdev->dev.platform_data;
> 
> Lets not support platform data at all upstream.

Got it, thanks.

> 
>> +	/* Register cooling device */
>> +	cdev = balanced_throttle_register(&pdata->tj_throttle, "cdev_throttle");
> 
> Is this picking specific policy ("balanced")? Should it be? What is
> "cdev_throttle"?

These codes are ported from our downstream kernel, it may handle
multiple cooling device, so it named as "balanced", but in here we
didn't use it, so it's better to remove them, and remain simplest codes.
I will change it as I said above.

> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 




More information about the linux-arm-kernel mailing list