[PATCH 0/8] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver

[Santosh Shilimkar]

OMAP UART IP needs manual idle modes based on functional state of the
IP. Currently this is handled by the driver with function pointers
implemented in platform code.

This however breaks in case of device tree because of missing
idle handling. 

The series tries to address the issue and tries to remove complete
sysc handling from serial driver.

Patches has been tested on OMAP4430 SDP and OMAP5 EVM where the console
sluggishness was observed without idle mode handling. CPUIDLE and
suspend tested ok on these devices.

Thanks to Vaibhav Bedia for testing on Beaglebone(AM33XX) with suspend and
also the UART async wakeup from suspend.

Thanks to Sourav Poddar for Beagle XM(OMAP3630) devices testing with
retention and offmode in Idle and suspend for non-DT builds.

Serial driver platform code still has one more function pointer
left which is used to trigger io_ring(). This one needs some
discussion with pincontrol driver folks on how to implement
such a feature with generic pincontrol driver.

Rajendra Nayak (4):
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming
  ARM: OMAP2+: hwmod: Always have OCP_SYSCONFIG.ENAWAKEUP enabled
  ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in
    active

Santosh Shilimkar (4):
  ARM: OMAP2+: hwmod-data: UART IP needs software control to manage
    sidle modes
  SERIAL: OMAP: Remove the slave idle handling from the driver
  ARM: OMAP2+: serial: Remove the un-used slave idle hooks
  ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis

 arch/arm/mach-omap2/omap_hwmod.c                   |  141 ++++----------------
 arch/arm/mach-omap2/omap_hwmod.h                   |   13 +-
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |    3 +
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         |    6 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |    4 +
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    6 +-
 arch/arm/mach-omap2/serial.c                       |   31 -----
 drivers/tty/serial/omap-serial.c                   |   23 ----
 8 files changed, 50 insertions(+), 177 deletions(-)

-- 
1.7.9.5