[PATCH 2/4] ARM: mach-shmobile: r8a7779: add SATA support

[Sergei Shtylyov]

Hello.

On 18-02-2013 5:23, Kuninori Morimoto wrote:

>> From: Vladimir Barinov <vladimir.barinov at cogentembedded.com>

>> Add SATA clock and platform device resources on r8a7779 SoC.
>> Add entry to r8a7779_auxdata_lookup[], so that devm_clk_get() in the driver
>> still works when we're using the device tree.

>> Signed-off-by: Vladimir Barinov <vladimir.barinov at cogentembedded.com>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
> (snip)

>>   	/* MSTP32 clocks */
>> +	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
>>   	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
>>   	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
>>   	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
> (snip)
>>   static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
>> +	OF_DEV_AUXDATA("renesas,rcar-sata", 0xfc600000, "sata_rcar", NULL),

> ??
> Is this settings really required for DT ??

    Yes, TTBOMK, it's the last resort measure used in exctly this case.

> I guess you can remove it, and add

>   +	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), // for platform
>   +	CLKDEV_DEV_ID("fc600000.sata_rcar", &mstp_clks[MSTP115]), // for DT

    IMO, this neither looks nor scales well.

> And...

>> [1/4] ARM: mach-shmobile: r8a7779: SATA DT configuration
>> [2/4] ARM: mach-shmobile: r8a7779: add SATA support
>> [3/4] libata: add R-Car SATA driver
>> [4/4] ARM: mach-shmobile: marzen: add SATA support

> I believe [3/4] patch should be base patch ?

    You're probably right, I'll reorder the patches when posting V2.

> Best regards
> ---
> Kuninori Morimoto

WBR, Sergei