[PATCH 3/4] ARM: mach-shmobile: r8a7779: Minimal setup using DT

[Simon Horman]

On Mon, Feb 18, 2013 at 09:14:05PM +0900, Magnus Damm wrote:
> On Mon, Feb 18, 2013 at 8:37 PM, Simon Horman <horms at verge.net.au> wrote:
> > On Mon, Feb 18, 2013 at 06:36:12PM +0900, Magnus Damm wrote:
> >> Hi Simon,
> >>
> >> Here's some feedback on your r8a7779 DT code.
> >>
> >> On Thu, Jan 31, 2013 at 10:50 AM, Simon Horman
> >> <horms+renesas at verge.net.au> wrote:
> >> > Allow a minimal setup of the r8a7779 SoC using a flattened device tree.
> >> > In particular, configure the i2c and ethernet controllers using a
> >> > flattened device tree.
> >> >
> >> > SCI serial controller and TMU clock source, whose drivers do not yet
> >> > support configuration using a flattened device tree, are still configured
> >> > using C code in order to allow booting of a board with this SoC.
> >> >
> >> > The ethernet controller also requires a regulator which is a board property.
> >> > A sample snippet DT for the marzen board is as follows:
> >> >
> >> > /dts-v1/;
> >> > /include/ "r8a7779.dtsi"
> >> >
> >> > / {
> >> >         fixedregulator3v3: fixedregulator at 0 {
> >> >                 compatible = "regulator-fixed";
> >> >                 regulator-name = "fixed-3.3V";
> >> >                 regulator-min-microvolt = <3300000>;
> >> >                 regulator-max-microvolt = <3300000>;
> >> >                 regulator-boot-on;
> >> >                 regulator-always-on;
> >> >         };
> >> > };
> >> >
> >> > &lan0 {
> >> >         vddvario-supply = <&fixedregulator3v3>;
> >> >         vdd33a-supply = <&fixedregulator3v3>;
> >> > };
> >> >
> >> > Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> >> > ---
> >>
> >> > --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> >> > +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
> >> > @@ -321,7 +321,7 @@ static struct platform_device i2c3_device = {
> >> >         .num_resources  = ARRAY_SIZE(rcar_i2c3_res),
> >> >  };
> >> >
> >> > -static struct platform_device *r8a7779_early_devices[] __initdata = {
> >> > +static struct platform_device *r8a7779_early_devices_dt[] __initdata = {
> >> >         &scif0_device,
> >> >         &scif1_device,
> >> >         &scif2_device,
> >> > @@ -330,15 +330,15 @@ static struct platform_device *r8a7779_early_devices[] __initdata = {
> >> >         &scif5_device,
> >> >         &tmu00_device,
> >> >         &tmu01_device,
> >> > +};
> >> > +
> >> > +static struct platform_device *r8a7779_early_devices[] __initdata = {
> >> >         &i2c0_device,
> >> >         &i2c1_device,
> >> >         &i2c2_device,
> >> >         &i2c3_device,
> >> >  };
> >> >
> >> > -static struct platform_device *r8a7779_late_devices[] __initdata = {
> >> > -};
> >> > -
> >>
> >> Thanks for your work on this. Two things with early/late devices on r8a7779:
> >>
> >> 1)  Same thing as sh73a0 applies here, please refrain from using early
> >> devices with DT.
> >
> > I guess you are referring to tmu.
> > If so, yes, I can move them to r8a7779_early_devices.
> 
> As we talked about last Friday, please try to avoid using early
> devices in general. It is enough to add SCIF and TMU as late devices.
> This goes for both sh73a0 and r8a7779. The only thing you need to do
> early is to setup the delay. Please look at the emev2 implementation
> for what is needed.

Thanks, I understand.

> >> 2) The i2c devices as early devices look incorrect. Can you make them
> >> late devices?
> >
> > r8a7779_early_devices is only used for the non-DT case.
> > For the non-DT case i2c was set up as early devices before this patch-set.
> > Would you like me to change them to late devices for non-DT,
> > a change that is orthogonal to this patch-set?
> 
> Yes. I realize it is not really related to this DT feature, but it
> certainly looks incorrect.

Got it. I will see about making it so.