[PATCH v6 05/16] clk: exynos5440: register clocks using common clock framework
Thomas Abraham
thomas.abraham at linaro.org
Mon Feb 18 03:21:15 EST 2013
The Exynos5440 clocks are statically listed and registered using the Samsung
specific common clock helper functions.
Cc: Mike Turquette <mturquette at linaro.org>
Cc: Kukjin Kim <kgene.kim at samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
.../devicetree/bindings/clock/exynos5440-clock.txt | 61 +++++++++
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos5440.c | 139 ++++++++++++++++++++
3 files changed, 201 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/exynos5440-clock.txt
create mode 100644 drivers/clk/samsung/clk-exynos5440.c
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
new file mode 100644
index 0000000..9dbf0a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -0,0 +1,61 @@
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ xtal 1
+ arm_clk 2
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ spi_baud 16
+ pb0_250 17
+ pr0_250 18
+ pr1_250 19
+ b_250 20
+ b_125 21
+ b_200 22
+ sata 23
+ usb 24
+ gmac0 25
+ cs250 26
+ pb0_250_o 27
+ pr0_250_o 28
+ pr1_250_o 29
+ b_250_o 30
+ b_125_o 31
+ b_200_o 32
+ sata_o 33
+ usb_o 34
+ gmac0_o 35
+ cs250_o 36
+
+Example: An example of a clock controller node is listed below.
+
+ clock: clock-controller at 0x10010000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x10000>;
+ #clock-cells = <1>;
+ };
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index f18fb07..b7c232e 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c
new file mode 100644
index 0000000..d588e93
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5440.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas.ab at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5440 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+#define CLKEN_OV_VAL 0xf8
+#define CPU_CLK_STATUS 0xfc
+#define MISC_DOUT1 0x558
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms.
+ */
+enum exynos5440_clks {
+ none, xtal, arm_clk,
+
+ spi_baud = 16, pb0_250, pr0_250, pr1_250, b_250, b_125, b_200, sata,
+ usb, gmac0, cs250, pb0_250_o, pr0_250_o, pr1_250_o, b_250_o, b_125_o,
+ b_200_o, sata_o, usb_o, gmac0_o, cs250_o,
+
+ nr_clks,
+};
+
+/* parent clock name list */
+PNAME(mout_armclk_p) = { "cplla", "cpllb" };
+PNAME(mout_spi_p) = { "div125", "div200" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = {
+ FRATE(none, "xtal", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initdata = {
+ FRATE(none, "ppll", NULL, CLK_IS_ROOT, 1000000000),
+ FRATE(none, "usb_phy0", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_phy1", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_ohci12", NULL, CLK_IS_ROOT, 12000000),
+ FRATE(none, "usb_ohci48", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* fixed factor clocks */
+struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initdata = {
+ FFACTOR(none, "div250", "ppll", 1, 4, 0),
+ FFACTOR(none, "div200", "ppll", 1, 5, 0),
+ FFACTOR(none, "div125", "div250", 1, 2, 0),
+};
+
+/* mux clocks */
+struct samsung_mux_clock exynos5440_mux_clks[] __initdata = {
+ MUX(none, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1),
+ MUX_A(arm_clk, "arm_clk", mout_armclk_p,
+ CPU_CLK_STATUS, 0, 1, "armclk"),
+};
+
+/* divider clocks */
+struct samsung_div_clock exynos5440_div_clks[] __initdata = {
+ DIV(spi_baud, "div_spi", "mout_spi", MISC_DOUT1, 3, 2),
+};
+
+/* gate clocks */
+struct samsung_gate_clock exynos5440_gate_clks[] __initdata = {
+ GATE(pb0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0),
+ GATE(pb0_250_o, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250_o, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250_o, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250_o, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125_o, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200_o, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata_o, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb_o, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0_o, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250_o, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xtal", .data = (void *)0, },
+ {},
+};
+
+/* register exynos5440 clocks */
+void __init exynos5440_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: failed to map clock controller registers,"
+ " aborting clock initialization\n", __func__);
+ return;
+ }
+
+ samsung_clk_init(np, reg_base, nr_clks, NULL, 0);
+ samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
+
+ samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
+ samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
+
+ samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+ ARRAY_SIZE(exynos5440_fixed_factor_clks));
+ samsung_clk_register_mux(exynos5440_mux_clks,
+ ARRAY_SIZE(exynos5440_mux_clks));
+ samsung_clk_register_div(exynos5440_div_clks,
+ ARRAY_SIZE(exynos5440_div_clks));
+ samsung_clk_register_gate(exynos5440_gate_clks,
+ ARRAY_SIZE(exynos5440_gate_clks));
+
+ pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("armclk"));
+ pr_info("exynos5440 clock initialization complete\n");
+}
+CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init);
--
1.7.5.4
More information about the linux-arm-kernel
mailing list