[PATCH] gpio: gpiolib: Remove WARN reference

[Fabio Estevam]

On Sat, Feb 16, 2013 at 7:24 PM, Fabio Estevam <festevam at gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> Since commit 372e722ea4d (gpiolib: use descriptors internally) the following
> warning is seen on a mx28evk board:
>
> [    5.116291] ------------[ cut here ]------------
> [    5.121306] WARNING: at drivers/gpio/gpiolib.c:125 gpio_to_desc+0x30/0x44()
> [    5.128491] invalid GPIO -2
> [    5.131563] Modules linked in:
> [    5.134846] [<c0014e20>] (unwind_backtrace+0x0/0xf4) from [<c001d428>] (warn_slowpath_common+0x4c/0x68)
> [    5.144682] [<c001d428>] (warn_slowpath_common+0x4c/0x68) from [<c001d4d8>] (warn_slowpath_fmt+0x30/0x40)
> [    5.154693] [<c001d4d8>] (warn_slowpath_fmt+0x30/0x40) from [<c0283434>] (gpio_to_desc+0x30/0x44)
> [    5.164002] [<c0283434>] (gpio_to_desc+0x30/0x44) from [<c0285470>] (gpio_request_one+0x10/0xe8)
> [    5.173294] [<c0285470>] (gpio_request_one+0x10/0xe8) from [<c0282f50>] (devm_gpio_request_one+0x40/0x74)
> [    5.183332] [<c0282f50>] (devm_gpio_request_one+0x40/0x74) from [<c0319be0>] (fec_probe+0x2d0/0x99c)
> [    5.192923] [<c0319be0>] (fec_probe+0x2d0/0x99c) from [<c02c8114>] (platform_drv_probe+0x14/0x18)
> [    5.202228] [<c02c8114>] (platform_drv_probe+0x14/0x18) from [<c02c6e00>] (driver_probe_device+0x90/0x224)
> [    5.212332] [<c02c6e00>] (driver_probe_device+0x90/0x224) from [<c02c7028>] (__driver_attach+0x94/0x98)
> [    5.222162] [<c02c7028>] (__driver_attach+0x94/0x98) from [<c02c5750>] (bus_for_each_dev+0x78/0x98)
> [    5.231642] [<c02c5750>] (bus_for_each_dev+0x78/0x98) from [<c02c5fd0>] (bus_add_driver+0x1a4/0x240)
> [    5.241207] [<c02c5fd0>] (bus_add_driver+0x1a4/0x240) from [<c02c7608>] (driver_register+0x78/0x140)
> [    5.250768] [<c02c7608>] (driver_register+0x78/0x140) from [<c00087a4>] (do_one_initcall+0x30/0x17c)
> [    5.260347] [<c00087a4>] (do_one_initcall+0x30/0x17c) from [<c05fa29c>] (kernel_init_freeable+0xe8/0x1b0)
> [    5.270381] [<c05fa29c>] (kernel_init_freeable+0xe8/0x1b0) from [<c044dfd4>] (kernel_init+0x8/0xe4)
> [    5.279886] [<c044dfd4>] (kernel_init+0x8/0xe4) from [<c000f248>] (ret_from_fork+0x14/0x2c)
> [    5.288740] ---[ end trace c15c72a22979d58d ]---
>
> mx28evk has two ethernet controllers. The GPIO that performs the
> ethernet reset on both ports is the same GPIO, so on the board dts file, only in
> one ethernet instance is passed the GPIO reset property.
>
> Replace the WARN with a pr_warn message.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Please discard this patch, I think the proper fix would be in the fec driver:

 drivers/net/ethernet/freescale/fec.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec.c
b/drivers/net/ethernet/freescale/fec.c
index 0fe68c4..5864a67 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1689,6 +1689,9 @@ static void fec_reset_phy(struct platform_device *pdev)
 		msec = 1;

 	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
+	if (!gpio_is_valid(phy_reset))
+		return;
+
 	err = devm_gpio_request_one(&pdev->dev, phy_reset,
 				    GPIOF_OUT_INIT_LOW, "phy-reset");
 	if (err) {

Will submit it to net-dev.