[PATCH 30/40] pm2301-charger: Removed unused code from PM2301 driver
Lee Jones
lee.jones at linaro.org
Fri Feb 15 07:45:00 EST 2013
From: Rupesh Kumar <rupesh.kumar at stericsson.com>
Some of the headers and defines accrued over time are no longer
in use. Let's take the opportunity to remove a few of them.
Signed-off-by: Rupesh Kumar <rupesh.kumar at stericsson.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper at stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais at stericsson.com>
---
drivers/power/pm2301_charger.c | 5 -----
drivers/power/pm2301_charger.h | 22 ----------------------
2 files changed, 27 deletions(-)
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index 2cc92ec..cb1c953 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -16,16 +16,12 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
-#include <linux/kobject.h>
-#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/pm2301_charger.h>
#include <linux/gpio.h>
@@ -1018,7 +1014,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
/* get parent data */
pm2->dev = &i2c_client->dev;
- pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
pm2->pm2_int = &pm2xxx_int;
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
index fad1f38..8ce3cc0 100644
--- a/drivers/power/pm2301_charger.h
+++ b/drivers/power/pm2301_charger.h
@@ -9,27 +9,6 @@
#ifndef PM2301_CHARGER_H
#define PM2301_CHARGER_H
-#define MAIN_WDOG_ENA 0x01
-#define MAIN_WDOG_KICK 0x02
-#define MAIN_WDOG_DIS 0x00
-#define CHARG_WD_KICK 0x01
-#define MAIN_CH_ENA 0x01
-#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
-#define MAIN_CH_DET 0x01
-#define MAIN_CH_CV_ON 0x04
-#define OTP_ENABLE_WD 0x01
-
-#define MAIN_CH_INPUT_CURR_SHIFT 4
-
-#define LED_INDICATOR_PWM_ENA 0x01
-#define LED_INDICATOR_PWM_DIS 0x00
-#define LED_IND_CUR_5MA 0x04
-#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
-
-/* HW failure constants */
-#define MAIN_CH_TH_PROT 0x02
-#define MAIN_CH_NOK 0x01
-
/* Watchdog timeout constant */
#define WD_TIMER 0x30 /* 4min */
#define WD_KICK_INTERVAL (30 * HZ)
@@ -495,7 +474,6 @@ struct pm2xxx_charger {
int failure_input_ovv;
unsigned int lpn_pin;
struct pm2xxx_interrupts *pm2_int;
- struct ab8500_gpadc *gpadc;
struct regulator *regu;
struct pm2xxx_bm_data *bat;
struct mutex lock;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list