[PATCH] ARM: shmobile: r8a7779: Correct TMU clock support again

[Paul Mundt]

On Thu, Feb 14, 2013 at 01:16:52PM +0900, Simon Horman wrote:
> On Thu, Feb 14, 2013 at 01:04:35PM +0900, Magnus Damm wrote:
> > On Thu, Feb 14, 2013 at 1:03 PM, Kuninori Morimoto
> > <kuninori.morimoto.gx at renesas.com> wrote:
> > >
> > > Hi Simon
> > >
> > >> This partially reverts 58079fa7d54a0929d304054ee759187a2ccd3cdf
> > >> (ARM: shmobile: r8a7779: Correct TMU clock support) and fixes
> > >> a regression introduced by that patch.
> > >>
> > >> Although the documentation I have indicates that the patch above is
> > >> correct it appears that the change causes the Marzen board to fail to boot
> > >> as follows.
> > > (snip)
> > >> --- a/arch/arm/mach-shmobile/clock-r8a7779.c
> > >> +++ b/arch/arm/mach-shmobile/clock-r8a7779.c
> > >> @@ -161,7 +161,7 @@ static struct clk_lookup lookups[] = {
> > >>       CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
> > >>       CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
> > >>       CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
> > >> -     CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
> > >> +     CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
> > >>       CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP014]), /* TMU02 */
> > >>       CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
> > >>       CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
> > >
> > > Really ???
> 
> I am surprised too!
> 
> > > Is MSTP value of TMU01 same as TMU00 ?
> 
> With the patch above the board appears to boot.
> Without the patch, it doesn't.
> 
> > Usually, the TMU channels are bundled together. So TMU00 may be for
> > channel 0->3 and TMU01 for 4->6.
> 
> Ok, so in that case the correct value for "sh_tmu.2" might actually
> be MSTP016 or MSTP015 depending on the bundle size. I am unsure how to test
> sh_tmu.2.
> 
> However, the documentation I have seems to talk about channels
> being TMU0..TMU2 and control of them being via MSTP016..MSTP014.
> I.e. what the code currently is but not what seems to work for
> TMU1 in practice.

I think you are getting caught up on naming semantics. The MSTP bit
controls a block, which in turn usually has multiple TMU channels
associated with it, so it's quite reasonable to register the same bit
multiple times for each channel it impacts (that's what refcounting is
for, after all).

The TMU driver only handles individual channels, so sh_tmu.0/1/2 are just
channel numbers, you don't have any insight in to which block they are a
subset of or how any of their MSTP bits relate to each other, nor should
you, as this gets handled by the clk API.

Consider the following example for SH7786:

        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP008]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP008]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[MSTP008]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[MSTP009]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[MSTP009]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[MSTP009]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.6", &mstp_clks[MSTP010]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.7", &mstp_clks[MSTP010]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.8", &mstp_clks[MSTP010]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.9", &mstp_clks[MSTP011]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.10", &mstp_clks[MSTP011]),
        CLKDEV_ICK_ID("tmu_fck", "sh_tmu.11", &mstp_clks[MSTP011]),

registers a tmu_fck lookup that maps back appropriately for each channel,
regardless of MSTP overlap. In practice these channels are split between 4 TMU
blocks, but the driver doesn't know or care.