[PATCH 05/06] ARM: shmobile: Common shmobile_scu_base in headsmp-scu.S

[Magnus Damm]

From: Magnus Damm <damm at opensource.se>

Update the code in headsmp-scu.S to use a global
shmobile_scu_base variable both for convenient SCU
base address storage and for the early SCU setup
code in shmobile_secondary_vector_scu.

With this patch applied r8a7779, sh73a0 and EMEV2
all make use of the global shmobile_scu_base
variable. However only sh73a0 makes use of the SCU
bring up code in shmobile_secondary_vector_scu.

Signed-off-by: Magnus Damm <damm at opensource.se>
---

 arch/arm/mach-shmobile/Makefile              |    4 ++--
 arch/arm/mach-shmobile/headsmp-scu.S         |    8 +++++++-
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/smp-emev2.c           |    2 --
 arch/arm/mach-shmobile/smp-r8a7779.c         |    2 --
 arch/arm/mach-shmobile/smp-sh73a0.c          |    2 --
 6 files changed, 10 insertions(+), 9 deletions(-)

--- 0009/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-02-13 21:54:34.000000000 +0900
@@ -16,8 +16,8 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
-smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o
+smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
+smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
 
 # IRQ objects
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
--- 0009/arch/arm/mach-shmobile/headsmp-scu.S
+++ work/arch/arm/mach-shmobile/headsmp-scu.S	2013-02-13 21:54:27.000000000 +0900
@@ -39,7 +39,8 @@ ENTRY(shmobile_secondary_vector_scu)
 	mrc     p15, 0, r0, c0, c0, 5	@ read MIPDR
 	and	r0, r0, #3		@ mask out cpu ID
 	lsl	r0, r0, #3		@ we will shift by cpu_id * 8 bits
-	mov	r1, #0xf0000000		@ SCU base address
+	ldr	r1, =shmobile_scu_base
+	ldr	r1, [r1]		@ SCU base address
 	ldr	r2, [r1, #8]		@ SCU Power Status Register
 	mov	r3, #3
 	bic	r2, r2, r3, lsl r0	@ Clear bits of our CPU (Run Mode)
@@ -48,3 +49,8 @@ ENTRY(shmobile_secondary_vector_scu)
 	ldr	pc, 1f
 1:	.long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
 ENDPROC(shmobile_secondary_vector_scu)
+
+	.text
+	.globl	shmobile_scu_base
+shmobile_scu_base:
+	.space	4
--- 0009/arch/arm/mach-shmobile/include/mach/common.h
+++ work/arch/arm/mach-shmobile/include/mach/common.h	2013-02-13 21:54:27.000000000 +0900
@@ -96,6 +96,7 @@ extern int shmobile_cpu_is_dead(unsigned
 static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
 #endif
 
+extern void __iomem *shmobile_scu_base;
 extern void shmobile_smp_init_cpus(unsigned int ncores);
 
 static inline void __init shmobile_init_late(void)
--- 0008/arch/arm/mach-shmobile/smp-emev2.c
+++ work/arch/arm/mach-shmobile/smp-emev2.c	2013-02-13 21:54:27.000000000 +0900
@@ -32,8 +32,6 @@
 
 #define EMEV2_SCU_BASE 0x1e000000
 
-static void __iomem *shmobile_scu_base;
-
 static DEFINE_SPINLOCK(scu_lock);
 
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
--- 0007/arch/arm/mach-shmobile/smp-r8a7779.c
+++ work/arch/arm/mach-shmobile/smp-r8a7779.c	2013-02-13 21:54:27.000000000 +0900
@@ -33,8 +33,6 @@
 #define AVECR IOMEM(0xfe700040)
 #define R8A7779_SCU_BASE IOMEM(0xf0000000)
 
-static void __iomem *shmobile_scu_base;
-
 static struct r8a7779_pm_ch r8a7779_ch_cpu1 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 1, /* ARM1 */
--- 0009/arch/arm/mach-shmobile/smp-sh73a0.c
+++ work/arch/arm/mach-shmobile/smp-sh73a0.c	2013-02-13 21:54:27.000000000 +0900
@@ -41,8 +41,6 @@
 
 #define SH73A0_SCU_BASE IOMEM(0xf0000000)
 
-static void __iomem *shmobile_scu_base;
-
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
 void __init sh73a0_register_twd(void)