[PATCH v7 1/6] watchdog: core: dt: add support for the timeout-sec dt property
Fabio Porcedda
fabio.porcedda at gmail.com
Wed Feb 13 04:28:24 EST 2013
On Wed, Feb 13, 2013 at 12:03 AM, Wim Van Sebroeck <wim at iguana.be> wrote:
> Hi Fabio,
>
> I must admit that the different iterations of this patch only made it better.
> I like the idea that you are proposing here (put the default timeout in the
> watchdog_device struct and use a helper function to set the timeout parameter
> value or the timeout-sec dt value). To be able to use other mechanism in the
> future also, I think it make more sense to pass the device instead of the
> device_node.
If i understand correctly you want to use "struct platform_device"
instead of "struct device_node",
in the function watchdog_init_timeout?
>> Signed-off-by: Fabio Porcedda <fabio.porcedda at gmail.com>
>> ---
>> Documentation/watchdog/watchdog-kernel-api.txt | 10 +++++++
>> drivers/watchdog/watchdog_core.c | 37 ++++++++++++++++++++++++++
>> include/linux/watchdog.h | 3 +++
>> 3 files changed, 50 insertions(+)
>>
> ...
>>
>> +static bool watchdog_is_valid_timeout(struct watchdog_device *wdd,
>> + unsigned int t)
>> +
>> +{
>> + if (wdd->min_timeout < wdd->max_timeout)
>> + return (wdd->min_timeout <= t) && (t <= wdd->max_timeout);
>> + else
>> + return (t > 0);
>> +}
>
> We use a similar check allready in watchdog_dev.c in the set_timeout wrapper.
> And we should move this to the watchdog.h include file so that drivers can also
> use the logic if necessary.
Do you prefer that i move or just export that function in watchdog.h?
I think it's better to just export it because the function is
not small enough as inline function, but both solutions are fine to me.
>
>> +/**
>> + * watchdog_init_timeout() - initialize the timeout field
>> + * @parm: timeout module parameter, it takes precedence over the
>> + * timeout-sec property.
>> + * @node: Retrieve the timeout-sec property only if the parm_timeout
>> + * is out of bounds.
>> + */
>> +void watchdog_init_timeout(struct watchdog_device *wdd, unsigned int parm,
>> + struct device_node *node)
>
> make this int so that drivers can give appropriate warnings if necessary.
In which cases i must return a non zero result?
For a value out of range in parm or node?
Wich value -EINVAL?
> I also detailed your documentation a bit more and incorporated above changes
> in an adjusted patch. Can you have a look at it and if OK for you I will put
> it in linux-watchdog-next as your v10 :-).
That's good for sure :)
> Kind regards,
> Wim.
> ---
> diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt
> index 086638f..a0438f3 100644
> --- a/Documentation/watchdog/watchdog-kernel-api.txt
> +++ b/Documentation/watchdog/watchdog-kernel-api.txt
> @@ -1,6 +1,6 @@
> The Linux WatchDog Timer Driver Core kernel API.
> ===============================================
> -Last reviewed: 22-May-2012
> +Last reviewed: 12-Feb-2013
>
> Wim Van Sebroeck <wim at iguana.be>
>
> @@ -212,3 +212,15 @@ driver specific data to and a pointer to the data itself.
> The watchdog_get_drvdata function allows you to retrieve driver specific data.
> The argument of this function is the watchdog device where you want to retrieve
> data from. The function returns the pointer to the driver specific data.
> +
> +To initialize the timeout field, the following function can be used:
> +
> +extern int watchdog_init_timeout(struct watchdog_device *wdd,
> + unsigned int timeout_parm, struct device *dev);
> +
> +The watchdog_init_timeout function allows you to initialize the timeout field
> +using the module timeout parameter or by retrieving the timeout-sec property from
> +the device tree (if the module timeout parameter is invalid). Best practice is
> +to set the default timeout value as timeout value in the watchdog_device and
> +then use this function to set the user "preferred" timeout value.
> +This routine returns zero on success and a negative errno code for failure.
> diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
> index 3796434..a74a3ef 100644
> --- a/drivers/watchdog/watchdog_core.c
> +++ b/drivers/watchdog/watchdog_core.c
> @@ -36,12 +36,62 @@
> #include <linux/init.h> /* For __init/__exit/... */
> #include <linux/idr.h> /* For ida_* macros */
> #include <linux/err.h> /* For IS_ERR macros */
> +#include <linux/of.h> /* For of_get_timeout_sec */
>
> #include "watchdog_core.h" /* For watchdog_dev_register/... */
>
> static DEFINE_IDA(watchdog_ida);
> static struct class *watchdog_class;
>
> +void watchdog_check_min_max_timeout(struct watchdog_device *wdd)
> +{
> + /*
> + * Check that we have valid min and max timeout values, if
> + * not reset them both to 0 (=not used or unknown)
> + */
> + if (wdd->min_timeout > wdd->max_timeout) {
> + pr_info("Invalid min and max timeout values, resetting to 0!\n");
> + wdd->min_timeout = 0;
> + wdd->max_timeout = 0;
> + }
> +}
> +
> +/**
> + * watchdog_init_timeout() - initialize the timeout field
> + * @timeout_parm: timeout module parameter
> + * @dev: Device that stores the timeout-sec property
> + *
> + * Initialize the timeout field of the watchdog_device struct with either the
> + * timeout module parameter (if it is valid value) or the timeout-sec property
> + * (only if it is a valid value and the timeout_parm is out of bounds).
> + * If none of them are valid then we keep the old value (which should normally
> + * be the default timeout value.
> + *
> + * A zero is returned on success and -EINVAL for failure.
> + */
> +int watchdog_init_timeout(struct watchdog_device *wdd,
> + unsigned int timeout_parm, struct device *dev)
> +{
> + unsigned int t = 0;
> +
> + watchdog_check_min_max_timeout(wdd);
> +
> + /* try to get the tiemout module parameter first */
> + if (!watchdog_timeout_invalid(wdd, timeout_parm)) {
> + wdd->timeout = timeout_parm;
> + return 0;
> + }
> +
> + /* try to get the timeout_sec property */
> + if (dev == NULL || dev->of_node == NULL)
> + return -EINVAL;
> + of_property_read_u32(dev->of_node, "timeout-sec", &t);
> + if (!watchdog_timeout_invalid(wdd, t))
> + wdd->timeout = t;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(watchdog_init_timeout);
> +
> /**
> * watchdog_register_device() - register a watchdog device
> * @wdd: watchdog device
> @@ -63,15 +113,7 @@ int watchdog_register_device(struct watchdog_device *wdd)
> if (wdd->ops->start == NULL || wdd->ops->stop == NULL)
> return -EINVAL;
>
> - /*
> - * Check that we have valid min and max timeout values, if
> - * not reset them both to 0 (=not used or unknown)
> - */
> - if (wdd->min_timeout > wdd->max_timeout) {
> - pr_info("Invalid min and max timeout values, resetting to 0!\n");
> - wdd->min_timeout = 0;
> - wdd->max_timeout = 0;
> - }
> + watchdog_check_min_max_timeout(wdd);
>
> /*
> * Note: now that all watchdog_device data has been verified, we
> diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
> index ef8edec..08b48bb 100644
> --- a/drivers/watchdog/watchdog_dev.c
> +++ b/drivers/watchdog/watchdog_dev.c
> @@ -200,8 +200,7 @@ static int watchdog_set_timeout(struct watchdog_device *wddev,
> !(wddev->info->options & WDIOF_SETTIMEOUT))
> return -EOPNOTSUPP;
>
> - if ((wddev->max_timeout != 0) &&
> - (timeout < wddev->min_timeout || timeout > wddev->max_timeout))
> + if (watchdog_timeout_invalid(wddev, timeout))
> return -EINVAL;
>
> mutex_lock(&wddev->lock);
> diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
> index 3a9df2f..2a3038e 100644
> --- a/include/linux/watchdog.h
> +++ b/include/linux/watchdog.h
> @@ -118,6 +118,13 @@ static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool noway
> set_bit(WDOG_NO_WAY_OUT, &wdd->status);
> }
>
> +/* Use the following function to check if a timeout value is invalid */
> +static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigned int t)
> +{
> + return ((wdd->max_timeout != 0) &&
> + (t < wdd->min_timeout || t > wdd->max_timeout));
> +}
> +
> /* Use the following functions to manipulate watchdog driver specific data */
> static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
> {
> @@ -130,6 +137,8 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
> }
>
> /* drivers/watchdog/watchdog_core.c */
> +extern int watchdog_init_timeout(struct watchdog_device *wdd,
> + unsigned int timeout_parm, struct device *dev);
> extern int watchdog_register_device(struct watchdog_device *);
> extern void watchdog_unregister_device(struct watchdog_device *);
>
--
Fabio Porcedda
More information about the linux-arm-kernel
mailing list