[PATCH 7/9] ARM: shmobile: kzm9g: Add LED1-LED4 to the device tree

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g.dts |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 7b37901..203efb8 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -19,4 +19,20 @@
 		device_type = "memory";
 		reg = <0x41000000 0x1e800000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&gpio 20 1>; /* Active low */
+		};
+		led2 {
+			gpios = <&gpio 21 1>; /* Active low */
+		};
+		led3 {
+			gpios = <&gpio 22 1>; /* Active low */
+		};
+		led4 {
+			gpios = <&gpio 23 1>; /* Active low */
+		};
+	};
 };
-- 
1.7.10.4