[PATCH 27/32] arm: mvebu: add PCIe Device Tree informations for Armada XP
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Feb 12 11:29:01 EST 2013
The Armada XP SoCs have multiple PCIe interfaces. The MV78230 has 2
PCIe units (one 4x or quad 1x, the other 1x only), the MV78260 has 3
PCIe units (two 4x or quad 1x and one 4x/1x), the MV78460 has 4 PCIe
units (two 4x or quad 1x and two 4x/1x). We therefore add the
necessary Device Tree informations to make those PCIe interfaces
usable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 99 ++++++++++++++++++
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 114 ++++++++++++++++++++
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 167 ++++++++++++++++++++++++++++++
3 files changed, 380 insertions(+)
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index e041f42..39344d1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -70,5 +70,104 @@
#interrupts-cells = <2>;
interrupts = <87>, <88>, <89>;
};
+
+ /*
+ * MV78230 has 2 PCIe units Gen2.0: One unit can be
+ * configured as x4 or quad x1 lanes. One unit is
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-370-xp-pcie";
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+
+ bus-range = <0x00 0xff>;
+
+ ranges = <0x00000800 0 0xd0040000 0xd0040000 0 0x00002000 /* port 0.0 registers */
+ 0x00004800 0 0xd0042000 0xd0042000 0 0x00002000 /* port 2.0 registers */
+ 0x00001000 0 0xd0044000 0xd0044000 0 0x00002000 /* port 0.1 registers */
+ 0x00001800 0 0xd0048000 0xd0048000 0 0x00002000 /* port 0.2 registers */
+ 0x00002000 0 0xd004C000 0xd004C000 0 0x00002000 /* port 0.3 registers */
+ 0x81000000 0 0 0xc0000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0 0xc1000000 0 0x08000000>; /* non-prefetchable memory */
+
+ pcie at 0,0 {
+ device_type = "pciex";
+ reg = <0x0800 0 0xd0040000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ interrupts = <1>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie at 0,1 {
+ device_type = "pciex";
+ reg = <0x1000 0 0xd0044000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ interrupts = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie at 0,2 {
+ device_type = "pciex";
+ reg = <0x1800 0 0xd0048000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ interrupts = <1>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie at 0,3 {
+ device_type = "pciex";
+ reg = <0x2000 0 0xd004C000 0 0xC000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ interrupts = <1>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie at 2,0 {
+ device_type = "pciex";
+ reg = <0x4800 0 0xd0042000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ interrupts = <1>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 9e23bd8..1b4db26 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -90,5 +90,119 @@
clocks = <&gateclk 1>;
status = "disabled";
};
+
+ /*
+ * MV78260 has 3 PCIe units Gen2.0: Two units can be
+ * configured as x4 or quad x1 lanes. One unit is
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-370-xp-pcie";
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges = <0x00000800 0 0xd0040000 0xd0040000 0 0x00002000 /* port 0.0 registers */
+ 0x00004800 0 0xd0042000 0xd0042000 0 0x00002000 /* port 2.0 registers */
+ 0x00001000 0 0xd0044000 0xd0044000 0 0x00002000 /* port 0.1 registers */
+ 0x00001800 0 0xd0048000 0xd0048000 0 0x00002000 /* port 0.2 registers */
+ 0x00002000 0 0xd004C000 0xd004C000 0 0x00002000 /* port 0.3 registers */
+ 0x00005000 0 0xd0082000 0xd0082000 0 0x00002000 /* port 3.0 registers */
+ 0x81000000 0 0 0xc0000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0 0xc1000000 0 0x08000000>; /* non-prefetchable memory */
+
+ pcie at 0,0 {
+ device_type = "pciex";
+ reg = <0x0800 0 0xd0040000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ interrupts = <1>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie at 0,1 {
+ device_type = "pciex";
+ reg = <0x1000 0 0xd0044000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ interrupts = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie at 0,2 {
+ device_type = "pciex";
+ reg = <0x1800 0 0xd0048000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ interrupts = <1>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie at 0,3 {
+ device_type = "pciex";
+ reg = <0x2000 0 0xd004C000 0 0xC000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ interrupts = <1>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie at 2,0 {
+ device_type = "pciex";
+ reg = <0x4800 0 0xd0042000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ interrupts = <1>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie at 3,0 {
+ device_type = "pciex";
+ reg = <0x5000 0 0xd0082000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ interrupts = <1>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 9659661..0673f77 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -105,5 +105,172 @@
clocks = <&gateclk 1>;
status = "disabled";
};
+
+ /*
+ * MV78460 has 4 PCIe units Gen2.0: Two units can be
+ * configured as x4 or quad x1 lanes. Two units are
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-370-xp-pcie";
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges = <0x00000800 0 0xd0040000 0xd0040000 0 0x00002000 /* port 0.0 registers */
+ 0x00004800 0 0xd0042000 0xd0042000 0 0x00002000 /* port 2.0 registers */
+ 0x00001000 0 0xd0044000 0xd0044000 0 0x00002000 /* port 0.1 registers */
+ 0x00001800 0 0xd0048000 0xd0048000 0 0x00002000 /* port 0.2 registers */
+ 0x00002000 0 0xd004C000 0xd004C000 0 0x00002000 /* port 0.3 registers */
+ 0x00002800 0 0xd0080000 0xd0080000 0 0x00002000 /* port 1.0 registers */
+ 0x00005000 0 0xd0082000 0xd0082000 0 0x00002000 /* port 3.0 registers */
+ 0x00003000 0 0xd0084000 0xd0084000 0 0x00002000 /* port 1.1 registers */
+ 0x00003800 0 0xd0088000 0xd0088000 0 0x00002000 /* port 1.2 registers */
+ 0x00004000 0 0xd008C000 0xd008C000 0 0x00002000 /* port 1.3 registers */
+ 0x81000000 0 0 0xc0000000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0 0xc1000000 0 0x08000000>; /* non-prefetchable memory */
+
+ pcie at 0,0 {
+ device_type = "pciex";
+ reg = <0x0800 0 0xd0040000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie at 0,1 {
+ device_type = "pciex";
+ reg = <0x1000 0 0xd0044000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie at 0,2 {
+ device_type = "pciex";
+ reg = <0x1800 0 0xd0048000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie at 0,3 {
+ device_type = "pciex";
+ reg = <0x2000 0 0xd004C000 0 0xC000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie at 1,0 {
+ device_type = "pciex";
+ reg = <0x2800 0 0xd0080000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+
+ pcie at 1,1 {
+ device_type = "pciex";
+ reg = <0x3000 0 0xd0084000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie at 1,2 {
+ device_type = "pciex";
+ reg = <0x3800 0 0xd0088000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie at 1,3 {
+ device_type = "pciex";
+ reg = <0x4000 0 0xd008C000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+ pcie at 2,0 {
+ device_type = "pciex";
+ reg = <0x4800 0 0xd0042000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie at 3,0 {
+ device_type = "pciex";
+ reg = <0x5000 0 0xd0082000 0 0x2000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+ };
};
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list