[PATCH v3 0/3] Add DT support for davinci_mmc driver

[Manjunathappa, Prakash]

Patch set adds DT support for davinci_mmc driver and is
verified on da850-evm without card_detect/write_protect and
EDMA support.

This patch depends on below patches under review:
1) Patch "drivers/pinctrl: grab default handles from device core"
	http://www.gossamer-threads.com/lists/linux/kernel/1664015?page=last
2) Patch "mmc: davinci: allow driver to work without DMA resource"
	http://www.mail-archive.com/linux-mmc@vger.kernel.org/msg18771.html

Applies on top of v3.9/dt-2 branch of linux_davinci tree:
git://gitorious.org/linux-davinci/linux-davinci.git

Since v2:
Modified the default value for bus-width and skipping the property specifications
for highspeed card capabilties for now. Re-ordered patch 2 and 3.
Since v1:
Modified the DT parse function to take default values, updated DT binding
documentation accordingly.

Manjunathappa, Prakash (3):
  mmc: davinci_mmc: add DT support
  ARM: davinci: da850: add mmc DT entries
  ARM: davinci: da850: override mmc DT node device name

 .../devicetree/bindings/mmc/davinci_mmc.txt        |   25 ++++++++
 arch/arm/boot/dts/da850-evm.dts                    |    7 ++
 arch/arm/boot/dts/da850.dtsi                       |   14 ++++
 arch/arm/mach-davinci/da8xx-dt.c                   |    2 +
 drivers/mmc/host/davinci_mmc.c                     |   65 +++++++++++++++++++-
 5 files changed, 111 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/davinci_mmc.txt

-- 
1.7.4.1