[PATCH V2] ARM: dts: add minimal DT support for DevKit8000

Anil Kumar anilk4.v at gmail.com
Sun Feb 10 11:05:53 EST 2013


DevKit8000 is a beagle board clone from Timll, sold by
armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
JTAG interface.

This patch adds the basic DT support for devkit8000. At this time, Information
of twl4030, MMC1, I2C1, leds and there pim mux information are added.

Signed-off-by: Anil Kumar <anilk4.v at gmail.com>
Tested-by: Thomas Weber <thomas at tomweber.eu>
---

 -This patch is based on top of kernel 3.8-rc5.

 -Tested on Devkit8000.

For V2:

 -Change model name as "TimLL OMAP3 Devkit8000"
 -Change compatible as "timll,omap3-devkit8000"
 -Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
  driver probe time.

:100644 100644 5ebb44f... 22ebc76... M	arch/arm/boot/dts/Makefile
:000000 100644 0000000... dc59272... A	arch/arm/boot/dts/omap3-devkit8000.dts
:100644 100644 53cb380b.. ccecb76... M	arch/arm/mach-omap2/board-generic.c
 arch/arm/boot/dts/Makefile             |    1 +
 arch/arm/boot/dts/omap3-devkit8000.dts |  126 ++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-generic.c    |    1 +
 3 files changed, 128 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5ebb44f..22ebc76 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle.dtb \
+	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
new file mode 100644
index 0000000..dc59272
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -0,0 +1,126 @@
+/*
+ * Author: Anil Kumar <anilk4.v at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		heartbeat {
+			label = "devkit8000::led1";
+			gpios = <&gpio6 26 0>;	/* 186 -> LED1 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "devkit8000::led2";
+			gpios = <&gpio6 3 0>;	/* 163 -> LED2 */
+			default-state = "on";
+			linux,default-trigger = "none";
+		};
+
+		usr {
+			label = "devkit8000::led3";
+			gpios = <&gpio6 4 0>;	/* 164 -> LED3 */
+			default-state = "on";
+			linux,default-trigger = "usr";
+                };
+
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	leds_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			0x168 0x4	/* GPIO_163 */
+			0x16c 0x4	/* GPIO_164 */
+			0x1b0 0x4	/* GPIO_186 */
+
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x188 0x118	/* I2C1_SCL */
+			0x18c 0x118	/* I2C1_SDA */
+                >;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&mcbsp1 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "disabled";
+};
+
+&mcbsp3 {
+	status = "disabled";
+};
+
+&mcbsp4 {
+	status = "disabled";
+};
+
+&mcbsp5 {
+	status = "disabled";
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380..ccecb76 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -110,6 +110,7 @@ MACHINE_END
 
 static const char *omap3_gp_boards_compat[] __initdata = {
 	"ti,omap3-beagle",
+	"timll,omap3-devkit8000",
 	NULL,
 };
 
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list