OMAP baseline test results for v3.8-rc6

[Paul Walmsley]

Hi Vaibhav,

On Fri, 8 Feb 2013, Hiremath, Vaibhav wrote:

> On Fri, Feb 08, 2013 at 20:40:22, Hiremath, Vaibhav wrote:
> > On Fri, Feb 08, 2013 at 19:04:04, Paul Walmsley wrote:
> > > On Fri, 8 Feb 2013, Paul Walmsley wrote:
> > > 
> > > > The point is to try to minimize bootloader dependencies.
> > > 
> > > Also if there are weird bootloader dependendencies that no one can track 
> > > down, we should document them somewhere, maybe underneath 
> > > Documentation/arm/OMAP.
> > > 
> > 
> 
> 
> 
> Paul,
> 
> Have you enabled below options in your defconfig,
> 
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y

For v3.8-rc6, the .config that I'm using is available here:

http://www.pwsan.com/omap/testlogs/test_v3.8-rc6/20130206155004/build/am33xx_only/am33xx_only

The kernel + appended DTB is available here:

http://www.pwsan.com/omap/testlogs/test_v3.8-rc6/20130206155004/build/am33xx_only/uImage-dtb.am335x-bone

The bootlog is available here:

http://www.pwsan.com/omap/testlogs/test_v3.8-rc6/20130206155004/boot/am335xbone/am335xbone_log.txt

> I am sure you must have already enabled it, but still would like to clarify 
> Here.

No problem, thanks for asking.

- Paul