[PATCH 03/10] USB: EHCI: make ehci-spear a separate driver
Viresh Kumar
viresh.kumar at linaro.org
Thu Feb 7 23:27:19 EST 2013
On Thu, Feb 7, 2013 at 11:04 PM, <manjunath.goudar at linaro.org> wrote:
> From: Manjunath Goudar <manjunath.goudar at linaro.org>
>
> Separate the Spear host controller driver from ehci-hcd host code
> into its own driver module.
Please write spear as SPEAr everywhere, leaving
functions/variables/config options.
> Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
> Signed-off-by: Deepak Saxena <dsaxena at linaro.org>
> Cc: Greg KH <greg at kroah.com>
> Cc: Alan Stern <stern at rowland.harvard.edu>
> Cc: Viresh Kumar <viresh.linux at gmail.com>
> Cc: Shiraz Hashim <shiraz.hashim at st.com>
> Cc: linux-usb at vger.kernel.org
> Cc: spear-devel at list.st.com
> ---
> drivers/usb/host/Kconfig | 8 +++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-hcd.c | 6 +---
> drivers/usb/host/ehci-spear.c | 77 ++++++++++++++++++++++-------------------
> 4 files changed, 51 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 11e102e..4413075 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -162,6 +162,14 @@ config USB_EHCI_HCD_OMAP
> Enables support for the on-chip EHCI controller on
> OMAP3 and later chips.
>
> +config USB_EHCI_HCD_SPEAR
> + tristate "Support for ST spear on-chip EHCI USB controller"
> + depends on USB_EHCI_HCD && PLAT_SPEAR
> + default y
> + ---help---
> + Enables support for the on-chip EHCI controller on
> + ST spear chips.
> +
> config USB_EHCI_MSM
> bool "Support for MSM on-chip EHCI USB controller"
> depends on USB_EHCI_HCD && ARCH_MSM
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index b54a597..c97f4ab 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
> obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
> obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
> obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
> +obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o
> obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
> obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
> obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index aaf93ca..68cea63 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -1292,11 +1292,6 @@ MODULE_LICENSE ("GPL");
> #define PLATFORM_DRIVER vt8500_ehci_driver
> #endif
>
> -#ifdef CONFIG_PLAT_SPEAR
> -#include "ehci-spear.c"
> -#define PLATFORM_DRIVER spear_ehci_hcd_driver
> -#endif
> -
> #ifdef CONFIG_USB_EHCI_MSM
> #include "ehci-msm.c"
> #define PLATFORM_DRIVER ehci_msm_driver
> @@ -1343,6 +1338,7 @@ MODULE_LICENSE ("GPL");
> !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
> !defined(PLATFORM_DRIVER) && \
> !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
> + !IS_ENABLED(CONFIG_PLAT_SPEAR) && \
> !defined(PS3_SYSTEM_BUS_DRIVER) && \
> !defined(OF_PLATFORM_DRIVER) && \
> !defined(XILINX_OF_PLATFORM_DRIVER)
> diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
> index 466c1bb..6e42cee 100644
> --- a/drivers/usb/host/ehci-spear.c
> +++ b/drivers/usb/host/ehci-spear.c
> @@ -11,11 +11,25 @@
> * more details.
> */
>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +#include <linux/io.h>
> +
> +
remove these blank lines.
> #include <linux/clk.h>
> #include <linux/jiffies.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/pm.h>
> +#include <linux/dma-mapping.h>
Keep all of them in alphabetical order.
> +#include "ehci.h"
> +
> +#define DRIVER_DESC "EHCI spear driver"
> +
> +static const char hcd_name[] = "ehci-spear";
>
> struct spear_ehci {
> struct ehci_hcd ehci;
> @@ -43,40 +57,7 @@ static int ehci_spear_setup(struct usb_hcd *hcd)
>
> return ehci_setup(hcd);
> }
> -
> -static const struct hc_driver ehci_spear_hc_driver = {
> - .description = hcd_name,
> - .product_desc = "SPEAr EHCI",
> - .hcd_priv_size = sizeof(struct spear_ehci),
> -
> - /* generic hardware linkage */
> - .irq = ehci_irq,
> - .flags = HCD_MEMORY | HCD_USB2,
> -
> - /* basic lifecycle operations */
> - .reset = ehci_spear_setup,
> - .start = ehci_run,
> - .stop = ehci_stop,
> - .shutdown = ehci_shutdown,
> -
> - /* managing i/o requests and associated device resources */
> - .urb_enqueue = ehci_urb_enqueue,
> - .urb_dequeue = ehci_urb_dequeue,
> - .endpoint_disable = ehci_endpoint_disable,
> - .endpoint_reset = ehci_endpoint_reset,
> -
> - /* scheduling support */
> - .get_frame_number = ehci_get_frame,
> -
> - /* root hub support */
> - .hub_status_data = ehci_hub_status_data,
> - .hub_control = ehci_hub_control,
> - .bus_suspend = ehci_bus_suspend,
> - .bus_resume = ehci_bus_resume,
> - .relinquish_port = ehci_relinquish_port,
> - .port_handed_over = ehci_port_handed_over,
> - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
> -};
> +static struct hc_driver __read_mostly ehci_spear_hc_driver;
>
> #ifdef CONFIG_PM
> static int ehci_spear_drv_suspend(struct device *dev)
> @@ -209,11 +190,35 @@ static struct platform_driver spear_ehci_hcd_driver = {
> .remove = spear_ehci_hcd_drv_remove,
> .shutdown = usb_hcd_platform_shutdown,
> .driver = {
> - .name = "spear-ehci",
> + .name = hcd_name,
> .bus = &platform_bus_type,
> .pm = &ehci_spear_pm_ops,
> .of_match_table = of_match_ptr(spear_ehci_id_table),
> }
> };
>
> -MODULE_ALIAS("platform:spear-ehci");
> +
> +static const struct ehci_driver_overrides spear_overrides __initdata = {
> + .reset = ehci_spear_setup,
> +};
> +
> +static int __init ehci_spear_init(void)
> +{
> + if (usb_disabled())
> + return -ENODEV;
> +
> + pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> +
> + ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides);
> + return platform_driver_register(&spear_ehci_hcd_driver);
> +}
> +module_init(ehci_spear_init);
> +
> +static void __exit ehci_spear_cleanup(void)
> +{
> + platform_driver_unregister(&spear_ehci_hcd_driver);
> +}
> +module_exit(ehci_spear_cleanup);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list