[v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards
Yang, Wenyou
Wenyou.Yang at atmel.com
Thu Feb 7 20:51:09 EST 2013
Hello, JC
> -----Original Message-----
> From: Yang, Wenyou
> Sent: 2013年2月6日 9:35
> To: 'Jean-Christophe PLAGNIOL-VILLARD'
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Ferre,
> Nicolas; richard.genoud at gmail.com; Lin, JM; linux at arm.linux.org.uk
> Subject: RE: [v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards
>
>
>
> > -----Original Message-----
> > From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com]
> > Sent: 2013年2月6日 3:50
> > To: Yang, Wenyou
> > Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> Ferre,
> > Nicolas; richard.genoud at gmail.com; Lin, JM; linux at arm.linux.org.uk
> > Subject: Re: [v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards
> >
> > On 15:34 Mon 14 Jan , Wenyou Yang wrote:
> > > From: Richard Genoud <richard.genoud at gmail.com>
> > >
> > > Signed-off-by: Richard Genoud <richard.genoud at gmail.com>
> > > [wenyou.yang at atmel.com: added spi nodes for the sam9263ek,
> sam9g20ek,
> > sam9m10g45ek and sam9n12ek boards]
> > > Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> > > Cc: linux at arm.linux.org.uk
> > > ---
> > > arch/arm/boot/dts/at91sam9263ek.dts | 14
> > ++++++++++++++
> > > arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 14
> > ++++++++++++++
> > > arch/arm/boot/dts/at91sam9m10g45ek.dts | 14
> > ++++++++++++++
> > > arch/arm/boot/dts/at91sam9n12ek.dts | 14
> > ++++++++++++++
> > > arch/arm/boot/dts/at91sam9x5ek.dtsi | 14
> ++++++++++++++
> > > 5 files changed, 70 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/at91sam9263ek.dts
> > b/arch/arm/boot/dts/at91sam9263ek.dts
> > > index 1eb0872..63ba57b 100644
> > > --- a/arch/arm/boot/dts/at91sam9263ek.dts
> > > +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> > > @@ -79,6 +79,20 @@
> > > };
> > > };
> > > };
> > > +
> > > + spi0: spi at fffa4000 {
> > > + status = "okay";
> > > + cs-gpios = <&pioA 5 0
> > > + &pioA 3 0
> > > + &pioA 4 0
> > > + &pioB 11 0
> > NACK
> >
> > we no use that much as cs-gpios on this hw
>
> Thanks for your feedback.
>
> Listing the all choices for cs-gpios, one cs-gpio is selected by reg value.
> Maybe listing one cs-gpio is OK.
> I will try it.
>
> I am going to dig the feasibility of removing cs-gpios.
I need remain the list of cs-gpios, because "master->num_chipselect" is got from the number of item of this list.
If this list is removed, only the cs-gpio for used chip-select is provided , it works for CS0 chip-select, but it fails to work for other than CS0, e.g. CS1.
Could you give me some idea?
Thank you in advance.
>
> > > + >;
> > > + mtd_dataflash at 0 {
> > > + compatible = "atmel,at45", "atmel,dataflash";
> > > + spi-max-frequency = <50000000>;
> > > + reg = <0>;
> > > + };
> > > + };
> > > };
> > >
> > > nand0: nand at 40000000 {
> > > diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> > b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> > > index da15e83..49ad49e 100644
> > > --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> > > +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> > > @@ -96,6 +96,20 @@
> > > status = "okay";
> > > pinctrl-0 = <&pinctrl_ssc0_tx>;
> > > };
> > > +
> > > + spi0: spi at fffc8000 {
> > > + status = "okay";
> > > + cs-gpios = <&pioA 3 0
> > > + &pioC 11 0
> > > + &pioC 16 0
> > > + &pioC 17 0
> > ditto and so on
> >
> > you must only provife the gpio use by the hw
> > > + >;
> > > + mtd_dataflash at 0 {
> > > + compatible = "atmel,at45", "atmel,dataflash";
> > > + spi-max-frequency = <50000000>;
> > > + reg = <1>;
> > > + };
> > > + };
> > > };
> > >
> > > nand0: nand at 40000000 {
> > > diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> > b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> > > index 20c3191..275f22d 100644
> > > --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> > > +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> > > @@ -102,6 +102,20 @@
> > > };
> > > };
> > > };
> > > +
> > > + spi0: spi at fffa4000{
> > > + status = "okay";
> > > + cs-gpios = <&pioB 3 0
> > > + &pioB 18 0
> > > + &pioB 19 0
> > > + &pioD 27 0
> > > + >;
> > > + mtd_dataflash at 0 {
> > > + compatible = "atmel,at45", "atmel,dataflash";
> > > + spi-max-frequency = <13000000>;
> > > + reg = <0>;
> > > + };
> > > + };
> > > };
> > >
> > > nand0: nand at 40000000 {
> > > diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
> > b/arch/arm/boot/dts/at91sam9n12ek.dts
> > > index 0376bf4..4eeca7b 100644
> > > --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> > > +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> > > @@ -67,6 +67,20 @@
> > > };
> > > };
> > > };
> > > +
> > > + spi0: spi at f0000000 {
> > > + status = "okay";
> > > + cs-gpios = <&pioA 14 0
> > > + &pioA 7 0
> > > + &pioA 1 0
> > > + &pioB 3 0
> > > + >;
> > > + m25p80 at 0 {
> > > + compatible = "atmel,at25df321a";
> > > + spi-max-frequency = <50000000>;
> > > + reg = <0>;
> > > + };
> > > + };
> > > };
> > >
> > > nand0: nand at 40000000 {
> > > diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi
> > b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> > > index 8a7cf1d..ca0a056 100644
> > > --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
> > > +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> > > @@ -84,6 +84,20 @@
> > > };
> > > };
> > > };
> > > +
> > > + spi0: spi at f0000000 {
> > > + status = "okay";
> > > + cs-gpios = <&pioA 14 0
> > > + &pioA 7 0
> > > + &pioA 1 0
> > > + &pioB 3 0
> > > + >;
> > > + m25p80 at 0 {
> > > + compatible = "atmel,at25df321a";
> > > + spi-max-frequency = <50000000>;
> > > + reg = <0>;
> > > + };
> > > + };
> > > };
> > >
> > > usb0: ohci at 00600000 {
> > > --
> > > 1.7.9.5
> > >
>
> Best Regards,
> Wenyou Yang
Best Regards,
Wenyou Yang
More information about the linux-arm-kernel
mailing list