[PATCH 4/4] clocksource: tegra20: use the device_node pointer passed to init
Rob Herring
robherring2 at gmail.com
Thu Feb 7 14:09:04 EST 2013
From: Rob Herring <rob.herring at calxeda.com>
We've already matched the node, so use the node pointer passed in. The rtc
init was intermingled with the timer init, so split this out to a separate
init function.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: John Stultz <johnstul at us.ibm.com>
Cc: Thomas Gleixner <tglx at linutronix.de>
---
Stephen,
It doesn't seem like there are any init ordering issues to me, but please
test/comment.
Rob
drivers/clocksource/tegra20_timer.c | 70 ++++++++++++++---------------------
1 file changed, 27 insertions(+), 43 deletions(-)
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 0bde03f..15cc723 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = {
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void)
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -262,9 +221,34 @@ static void __init tegra20_init_timer(void)
#ifdef CONFIG_HAVE_ARM_TWD
twd_local_timer_of_register();
#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = clk_get_sys("rtc-tegra", NULL);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list