[PATCH V2 5/6] ARM: regulator: add tps6507x device tree data

Vishwanathrao Badarkhe, Manish manishv.b at ti.com
Thu Feb 7 05:21:09 EST 2013


Hi Mark,

On Tue, Jan 29, 2013 at 13:08:53, Vishwanathrao Badarkhe, Manish wrote:
> Add device tree data for tps6507x regulator by adding all tps6507x regulator nodes. Regulators are initialized based on compatible name provided in tps6507x DT file.
> 
> All tps6507x PMIC regulator device tree nodes are placed in a separate device tree include file (tps6507x.dtsi).
> tps6507x.dtsi file is created using datasheet http://www.ti.com/lit/ds/symlink/tps65070.pdf
> 
> Tested on da850-evm.
> 
> Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b at ti.com>
> ---
> Changes since V1:
>  - Updated Copyright information.
> 
> :000000 100644 0000000... 4c326e5... A	arch/arm/boot/dts/tps6507x.dtsi
>  arch/arm/boot/dts/tps6507x.dtsi |   47 +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 47 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tps6507x.dtsi b/arch/arm/boot/dts/tps6507x.dtsi new file mode 100644 index 0000000..4c326e5
> --- /dev/null
> +++ b/arch/arm/boot/dts/tps6507x.dtsi
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright (C) 2013 Texas Instruments Incorporated - 
> +http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/*
> + * Integrated Power Management Chip
> + * http://www.ti.com/lit/ds/symlink/tps65070.pdf
> + */
> +
> +&tps {
> +	compatible = "ti,tps6507x";
> +
> +	regulators {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdcdc1_reg: regulator at 0 {
> +			reg = <0>;
> +			regulator-compatible = "VDCDC1";
> +		};
> +
> +		vdcdc2_reg: regulator at 1 {
> +			reg = <1>;
> +			regulator-compatible = "VDCDC2";
> +		};
> +
> +		vdcdc3_reg: regulator at 2 {
> +			reg = <2>;
> +			regulator-compatible = "VDCDC3";
> +		};
> +
> +		ldo1_reg: regulator at 3 {
> +			reg = <3>;
> +			regulator-compatible = "LDO1";
> +		};
> +
> +		ldo2_reg: regulator at 4 {
> +			reg = <4>;
> +			regulator-compatible = "LDO2";
> +		};
> +
> +	};
> +};
> --
> 1.7.4.1
> 
> 

If there are not any comments on this patch, Could you please 
accept this patch?

Regards, 
Manish



More information about the linux-arm-kernel mailing list