[PATCH 2/5] ARM: dts: exynos5250-arndale: Add PMIC node entry
Tushar Behera
tushar.behera at linaro.org
Thu Feb 7 00:15:26 EST 2013
From: Amit Daniel Kachhap <amit.daniel at samsung.com>
Added S5M8767 PMIC DT nodes to Arndale board.
Signed-off-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 213 +++++++++++++++++++++++++++++-
1 files changed, 212 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 9ce40df..b40a02f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -25,7 +25,218 @@
};
i2c at 12C60000 {
- status = "disabled";
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+ gpios = <&gpb3 0 2 3 0>,
+ <&gpb3 1 2 3 0>;
+
+ s5m8767_pmic at 66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 1 0 0>,
+ <&gpd1 1 1 0 0>,
+ <&gpd1 2 1 0 0>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>,
+ <&gpx2 4 1 0 0>,
+ <&gpx2 5 1 0 0>;
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_INT_1.0V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_G3D_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ };
+ };
};
i2c at 12C70000 {
--
1.7.4.1
More information about the linux-arm-kernel
mailing list