[PATCH v2 4/5] ARM: OMAP: USB: Add phy binding information
Kishon Vijay Abraham I
kishon at ti.com
Wed Feb 6 08:28:50 EST 2013
This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Acked-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 ++
arch/arm/mach-omap2/board-3430sdp.c | 2 ++
arch/arm/mach-omap2/board-4430sdp.c | 2 ++
arch/arm/mach-omap2/board-cm-t35.c | 2 ++
arch/arm/mach-omap2/board-devkit8000.c | 2 ++
arch/arm/mach-omap2/board-igep0020.c | 2 ++
arch/arm/mach-omap2/board-ldp.c | 2 ++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3logic.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
arch/arm/mach-omap2/board-omap4panda.c | 2 ++
arch/arm/mach-omap2/board-overo.c | 2 ++
arch/arm/mach-omap2/board-rm680.c | 2 ++
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
17 files changed, 34 insertions(+)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 4815ea6..1337f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
omap_hsmmc_init(mmc);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bb73afc..8a2e242 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
omap_ads7846_init(1, gpio_pendown, 310, NULL);
omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..8e8efcc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..f1172f2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -30,6 +30,7 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
cm_t35_init_display();
omap_twl4030_audio_init("cm-t3x");
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
cm_t35_init_usbh();
cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..77cade52 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,6 +29,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..15e5881 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -18,6 +18,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/usb/phy.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
omap_serial_init();
omap_sdrc_init(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 0869f4f..3b5510a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,6 +28,7 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..4616f92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -30,6 +30,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a198b61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,6 +41,7 @@
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <linux/export.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
usbhs_bdata.reset_gpio_port[1] = 135;
}
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2a065ba..9409eb8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -29,6 +29,7 @@
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
board_mmc_init();
board_smsc911x_init();
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index a53a668..1ac3e81 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,6 +35,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 53a6cbc..63cb204 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -33,6 +33,7 @@
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 263cb9c..6b22ce3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
/* Touchscreen and accelerometer */
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 769c1fe..40184cc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
+ usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..7e43ff3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -36,6 +36,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
mt46h32m32lf6_sdrc_params);
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c777b7..f8a272c 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -18,6 +18,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
rm680_peripherals_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 26e07ad..dc5498b 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
omap_hsmmc_init(mmc);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
enable_board_wakeup_source();
omap_serial_init();
--
1.7.10.4
More information about the linux-arm-kernel
mailing list