[PATCH v5 1/4] thermal: Add support for the thermal sensor on Kirkwood SoCs
Andrew Lunn
andrew at lunn.ch
Wed Feb 6 01:35:24 EST 2013
From: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
This patch adds support for Kirkwood 88F6282 and 88F6283 thermal sensor.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
.../bindings/thermal/kirkwood-thermal.txt | 15 +++
drivers/thermal/Kconfig | 8 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/kirkwood_thermal.c | 134 ++++++++++++++++++++
4 files changed, 158 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
create mode 100644 drivers/thermal/kirkwood_thermal.c
diff --git a/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
new file mode 100644
index 0000000..8c0f5eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
@@ -0,0 +1,15 @@
+* Kirkwood Thermal
+
+This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
+don't contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,kirkwood-thermal"
+- reg : Address range of the thermal registers
+
+Example:
+
+ thermal at 10078 {
+ compatible = "marvell,kirkwood-thermal";
+ reg = <0x10078 0x4>;
+ };
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index c2c77d1..ff34a0a 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -93,6 +93,14 @@ config RCAR_THERMAL
Enable this to plug the R-Car thermal sensor driver into the Linux
thermal framework
+config KIRKWOOD_THERMAL
+ tristate "Temperature sensor on Marvell Kirkwood SoCs"
+ depends on ARCH_KIRKWOOD
+ depends on OF
+ help
+ Support for the Kirkwood thermal sensor driver into the Linux thermal
+ framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+
config EXYNOS_THERMAL
tristate "Temperature sensor on Samsung EXYNOS"
depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index d8da683..99026b2 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
# platform thermal drivers
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
+obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
new file mode 100644
index 0000000..65cb4f0
--- /dev/null
+++ b/drivers/thermal/kirkwood_thermal.c
@@ -0,0 +1,134 @@
+/*
+ * Kirkwood thermal sensor driver
+ *
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define KIRKWOOD_THERMAL_VALID_OFFSET 9
+#define KIRKWOOD_THERMAL_VALID_MASK 0x1
+#define KIRKWOOD_THERMAL_TEMP_OFFSET 10
+#define KIRKWOOD_THERMAL_TEMP_MASK 0x1FF
+
+/* Kirkwood Thermal Sensor Dev Structure */
+struct kirkwood_thermal_priv {
+ void __iomem *sensor;
+};
+
+static int kirkwood_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ unsigned long reg;
+ struct kirkwood_thermal_priv *priv = thermal->devdata;
+
+ reg = readl_relaxed(priv->sensor);
+
+ /* Valid check */
+ if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
+ KIRKWOOD_THERMAL_VALID_MASK) {
+ dev_err(&thermal->device,
+ "Temperature sensor reading not valid\n");
+ return -EIO;
+ }
+
+ /*
+ * Calculate temperature. See Section 8.10.1 of the 88AP510,
+ * datasheet, which has the same sensor.
+ * Documentation/arm/Marvell/README
+ */
+ reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
+ KIRKWOOD_THERMAL_TEMP_MASK;
+ *temp = ((2281638UL - (7298*reg)) / 10);
+
+ return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+ .get_temp = kirkwood_get_temp,
+};
+
+static const struct of_device_id kirkwood_thermal_id_table[] = {
+ { .compatible = "marvell,kirkwood-thermal" },
+ {}
+};
+
+static int kirkwood_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal = NULL;
+ struct kirkwood_thermal_priv *priv;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get platform resource\n");
+ return -ENODEV;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
+ if (!priv->sensor) {
+ dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
+ priv, &ops, NULL, 0, 0);
+ if (IS_ERR(thermal)) {
+ dev_err(&pdev->dev,
+ "Failed to register thermal zone device\n");
+ return PTR_ERR(thermal);
+ }
+
+ platform_set_drvdata(pdev, thermal);
+
+ return 0;
+}
+
+static int kirkwood_thermal_exit(struct platform_device *pdev)
+{
+ struct thermal_zone_device *kirkwood_thermal =
+ platform_get_drvdata(pdev);
+
+ thermal_zone_device_unregister(kirkwood_thermal);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);
+
+static struct platform_driver kirkwood_thermal_driver = {
+ .probe = kirkwood_thermal_probe,
+ .remove = kirkwood_thermal_exit,
+ .driver = {
+ .name = "kirkwood_thermal",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(kirkwood_thermal_id_table),
+ },
+};
+
+module_platform_driver(kirkwood_thermal_driver);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu at nigauri.org>");
+MODULE_DESCRIPTION("kirkwood thermal driver");
+MODULE_LICENSE("GPL");
--
1.7.10.4
More information about the linux-arm-kernel
mailing list