[PATCH] arm: mvebu: Add SPI flash on Armada XP-GP board

[Ezequiel Garcia]

This patch adds an SPI master device node for Armada XP-GP board.
This master node is an SPI flash controller 'n25q128a13'.

Since there is no 'partitions' node declared, one full sized
partition named as the device will be created.

Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Lior Amsalem <alior at marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
This patch depends on:

 1. Gregory's patch for Armada XP GP board:
      arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)

 2. My previous patch for SPI on Armada 370/XP:
      arm: mvebu: Add support for SPI controller in Armada 370/XP

And don't forget to compile the SPI flash driver, CONFIG_MTD_M25P80=y

 arch/arm/boot/dts/armada-xp-gp.dts |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 3eea531..1c8afe2 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -97,5 +97,17 @@
 			phy = <&phy3>;
 			phy-mode = "rgmii-id";
 		};
+
+		spi0: spi at d0010600 {
+			status = "okay";
+
+			spi-flash at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "n25q128a13";
+				reg = <0>; /* Chip select 0 */
+				spi-max-frequency = <108000000>;
+			};
+		};
 	};
 };
-- 
1.7.8.6