[PATCH v2] ARM i.MX25: clk: parent per5_clk to AHB clock

[Sascha Hauer]

On Wed, Jan 30, 2013 at 02:16:00PM +0100, Steffen Trumtrar wrote:
> The mxc-timer on the imx25 needs to be derived from the AHB clock.
> If a bootloader reparents this clock to the ipg_clk_highfreq, which according
> to the datasheet is a valid operation, the system can/will produce lockups/
> freezes after some time [1].
> 
> This can be forced with code like
> 	while(1)
>                 syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp);
> 
> This was already fixed with the commit
> 	"i.MX25 GPT clock fix: ensure correct the clock source" [2],
> for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework
> ("ARM i.MX25: implement clocks using common clock framework") [3]
> 
> [1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html
> [2]: 2012d9ca2a1381ae3e733330a7f0d1d2f1988bba
> [3]: 6bbaec5676e4f475b0d78743cbd4c70a8804ce14
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> Cc: stable at vger.kernel.org # v3.5+

Applied, thanks

Sascha

> ---
>  arch/arm/mach-imx/clk-imx25.c |    3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
> index 5d34f67..0e6dde6 100644
> --- a/arch/arm/mach-imx/clk-imx25.c
> +++ b/arch/arm/mach-imx/clk-imx25.c
> @@ -177,6 +177,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
>  			pr_err("i.MX25 clk %d: register failed with %ld\n",
>  				i, PTR_ERR(clk[i]));
>  
> +	/* Clock source for gpt must be derived from AHB */
> +	clk_set_parent(clk[per5_sel], clk[ahb]);
> +
>  	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
>  	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
>  
> -- 
> 1.7.10.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |