[PATCH 08/30] mfd: omap-usb-host: Remove PHY reset handling code

Felipe Balbi balbi at ti.com
Tue Feb 5 04:25:24 EST 2013


On Mon, Jan 28, 2013 at 01:30:09PM +0200, Roger Quadros wrote:
> PHY reset GPIO handling will be done in the PHY driver
> 
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> Acked-by: Samuel Ortiz <sameo at linux.intel.com>

Acked-by: Felipe Balbi <balbi at ti.com>

> ---
>  drivers/mfd/omap-usb-host.c |   47 -------------------------------------------
>  1 files changed, 0 insertions(+), 47 deletions(-)
> 
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 0874352..502a779 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -430,24 +430,10 @@ static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
>  static void omap_usbhs_init(struct device *dev)
>  {
>  	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
> -	struct usbhs_omap_platform_data	*pdata = omap->pdata;
>  	unsigned			reg;
>  
>  	dev_dbg(dev, "starting TI HSUSB Controller\n");
>  
> -	if (pdata->phy_reset) {
> -		if (gpio_is_valid(pdata->reset_gpio_port[0]))
> -			gpio_request_one(pdata->reset_gpio_port[0],
> -					 GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
> -
> -		if (gpio_is_valid(pdata->reset_gpio_port[1]))
> -			gpio_request_one(pdata->reset_gpio_port[1],
> -					 GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
> -
> -		/* Hold the PHY in RESET for enough time till DIR is high */
> -		udelay(10);
> -	}
> -
>  	pm_runtime_get_sync(dev);
>  
>  	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
> @@ -476,37 +462,8 @@ static void omap_usbhs_init(struct device *dev)
>  	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
>  
>  	pm_runtime_put_sync(dev);
> -	if (pdata->phy_reset) {
> -		/* Hold the PHY in RESET for enough time till
> -		 * PHY is settled and ready
> -		 */
> -		udelay(10);
> -
> -		if (gpio_is_valid(pdata->reset_gpio_port[0]))
> -			gpio_set_value_cansleep
> -				(pdata->reset_gpio_port[0], 1);
> -
> -		if (gpio_is_valid(pdata->reset_gpio_port[1]))
> -			gpio_set_value_cansleep
> -				(pdata->reset_gpio_port[1], 1);
> -	}
> -}
> -
> -static void omap_usbhs_deinit(struct device *dev)
> -{
> -	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
> -	struct usbhs_omap_platform_data	*pdata = omap->pdata;
> -
> -	if (pdata->phy_reset) {
> -		if (gpio_is_valid(pdata->reset_gpio_port[0]))
> -			gpio_free(pdata->reset_gpio_port[0]);
> -
> -		if (gpio_is_valid(pdata->reset_gpio_port[1]))
> -			gpio_free(pdata->reset_gpio_port[1]);
> -	}
>  }
>  
> -
>  /**
>   * usbhs_omap_probe - initialize TI-based HCDs
>   *
> @@ -710,8 +667,6 @@ static int usbhs_omap_probe(struct platform_device *pdev)
>  	return 0;
>  
>  err_alloc:
> -	omap_usbhs_deinit(&pdev->dev);
> -
>  	for (i = 0; i < omap->nports; i++) {
>  		if (!IS_ERR(omap->utmi_clk[i]))
>  			clk_put(omap->utmi_clk[i]);
> @@ -756,8 +711,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
>  	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
>  	int i;
>  
> -	omap_usbhs_deinit(&pdev->dev);
> -
>  	for (i = 0; i < omap->nports; i++) {
>  		if (!IS_ERR(omap->utmi_clk[i]))
>  			clk_put(omap->utmi_clk[i]);
> -- 
> 1.7.4.1
> 

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130205/2baee66a/attachment.sig>


More information about the linux-arm-kernel mailing list