[PATCH v4 08/15] ARM: vexpress: introduce DCSCB support
Nicolas Pitre
nicolas.pitre at linaro.org
Tue Feb 5 00:22:05 EST 2013
This adds basic CPU and cluster reset controls on RTSM for the
A15x4-A7x4 model configuration using the Dual Cluster System
Configuration Block (DCSCB).
The cache coherency interconnect (CCI) is not handled yet.
Signed-off-by: Nicolas Pitre <nico at linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
.../devicetree/bindings/arm/rtsm-dcscb.txt | 19 +++
arch/arm/mach-vexpress/Kconfig | 8 +
arch/arm/mach-vexpress/Makefile | 1 +
arch/arm/mach-vexpress/dcscb.c | 162 +++++++++++++++++++++
4 files changed, 190 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
create mode 100644 arch/arm/mach-vexpress/dcscb.c
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
new file mode 100644
index 0000000000..3b8fbf3c00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
@@ -0,0 +1,19 @@
+ARM Dual Cluster System Configuration Block
+-------------------------------------------
+
+The Dual Cluster System Configuration Block (DCSCB) provides basic
+functionality for controlling clocks, resets and configuration pins in
+the Dual Cluster System implemented by the Real-Time System Model (RTSM).
+
+Required properties:
+
+- compatible : should be "arm,rtsm,dcscb"
+
+- reg : physical base address and the size of the registers window
+
+Example:
+
+ dcscb at 60000000 {
+ compatible = "arm,rtsm,dcscb";
+ reg = <0x60000000 0x1000>;
+ };
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 52d315b792..f3f92b120a 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -52,4 +52,12 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
+config ARCH_VEXPRESS_DCSCB
+ bool "Dual Cluster System Control Block (DCSCB) support"
+ depends on CLUSTER_PM
+ help
+ Support for the Dual Cluster System Configuration Block (DCSCB).
+ This is needed to provide CPU and cluster power management
+ on RTSM.
+
endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 80b64971fb..2253644054 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -6,5 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
obj-y := v2m.o reset.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
+obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
new file mode 100644
index 0000000000..07e835cb72
--- /dev/null
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block
+ *
+ * Created by: Nicolas Pitre, May 2012
+ * Copyright: (C) 2012-2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/of_address.h>
+#include <linux/vexpress.h>
+
+#include <asm/mcpm_entry.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+
+#define RST_HOLD0 0x0
+#define RST_HOLD1 0x4
+#define SYS_SWRESET 0x8
+#define RST_STAT0 0xc
+#define RST_STAT1 0x10
+#define EAG_CFG_R 0x20
+#define EAG_CFG_W 0x24
+#define KFC_CFG_R 0x28
+#define KFC_CFG_W 0x2c
+#define DCS_CFG_R 0x30
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static void __iomem *dcscb_base;
+
+static int dcscb_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int rst_hold, cpumask = (1 << cpu);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ if (cpu >= 4 || cluster >= 2)
+ return -EINVAL;
+
+ /*
+ * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+ * variant exists, we need to disable IRQs manually here.
+ */
+ local_irq_disable();
+ arch_spin_lock(&dcscb_lock);
+
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ if (rst_hold & (1 << 8)) {
+ /* remove cluster reset and add individual CPU's reset */
+ rst_hold &= ~(1 << 8);
+ rst_hold |= 0xf;
+ }
+ rst_hold &= ~(cpumask | (cpumask << 4));
+ writel(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+
+ arch_spin_unlock(&dcscb_lock);
+ local_irq_enable();
+
+ return 0;
+}
+
+static void dcscb_power_down(void)
+{
+ unsigned int mpidr, cpu, cluster, rst_hold, cpumask, last_man;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ cpumask = (1 << cpu);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cpu >= 4 || cluster >= 2);
+
+ arch_spin_lock(&dcscb_lock);
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ rst_hold |= cpumask;
+ if (((rst_hold | (rst_hold >> 4)) & 0xf) == 0xf)
+ rst_hold |= (1 << 8);
+ writel(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+ arch_spin_unlock(&dcscb_lock);
+ last_man = (rst_hold & (1 << 8));
+
+ /*
+ * Now let's clean our L1 cache and shut ourself down.
+ * If we're the last CPU in this cluster then clean L2 too.
+ */
+
+ /*
+ * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
+ * a preliminary flush here for those CPUs. At least, that's
+ * the theory -- without the extra flush, Linux explodes on
+ * RTSM (maybe not needed anymore, to be investigated)..
+ */
+ flush_cache_louis();
+ set_cr(get_cr() & ~CR_C);
+
+ if (!last_man) {
+ flush_cache_louis();
+ } else {
+ flush_cache_all();
+ outer_flush_all();
+ }
+
+ /* Disable local coherency by clearing the ACTLR "SMP" bit: */
+ set_auxcr(get_auxcr() & ~(1 << 6));
+
+ /* Now we are prepared for power-down, do it: */
+ dsb();
+ wfi();
+
+ /* Not dead at this point? Let our caller cope. */
+}
+
+static const struct mcpm_platform_ops dcscb_power_ops = {
+ .power_up = dcscb_power_up,
+ .power_down = dcscb_power_down,
+};
+
+static int __init dcscb_init(void)
+{
+ struct device_node *node;
+ int ret;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb");
+ if (!node)
+ return -ENODEV;
+ dcscb_base= of_iomap(node, 0);
+ if (!dcscb_base)
+ return -EADDRNOTAVAIL;
+
+ ret = mcpm_platform_register(&dcscb_power_ops);
+ if (ret) {
+ iounmap(dcscb_base);
+ return ret;
+ }
+
+ /*
+ * Future entries into the kernel can now go
+ * through the cluster entry vectors.
+ */
+ vexpress_flags_set(virt_to_phys(mcpm_entry_point));
+
+ return 0;
+}
+
+early_initcall(dcscb_init);
--
1.8.1.2
More information about the linux-arm-kernel
mailing list