[PATCH] ARM: dts: add mshc controller node for Exynos4x12 SoCs

[Kukjin Kim]

Thomas Abraham wrote:
> 
> Commit cea0f256 ("ARM: dts: Add board dts file for ODROID-X") includes a
> node
> to describe the board level properties for mshc controller. But the mshc
> controller node was not added in the Exynos4x12 dtsi file which resulted
> in the following warning when compiling the dtb files.
> 
> Warning (reg_format): "reg" property in /mshc at 12550000/slot at 0 has invalid
> length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value
> for /mshc at 12550000/slot at 0
> Warning (avoid_default_addr_size): Relying on default #size-cells value
for
> /mshc at 12550000/slot at 0
> 
> Fix this by adding the mshc controller node for Exynos4x12 SoCs.
> 
> Cc: Dongjin Kim <tobetter at gmail.com>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/boot/dts/exynos4412.dtsi |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi
> b/arch/arm/boot/dts/exynos4412.dtsi
> index 78ed377..96f5b66 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -32,4 +32,12 @@
>  		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
>  			     <1 12 0>, <1 12 0>, <1 12 0>, <1 12 0>;
>  	};
> +
> +	mshc at 12550000 {
> +		compatible = "samsung,exynos4412-dw-mshc";
> +		reg = <0x12550000 0x1000>;
> +		interrupts = <0 77 0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
>  };
> --
> 1.7.5.4

Looks good to me, applied with "Tested-by: Dongjin Kim <tobetter at gmail.com>"

Thanks.

- Kukjin