[PATCH v6 4/8] usb: chipidea: consolidate kinds of APIs for both roles
Peter Chen
peter.chen at freescale.com
Sun Feb 3 22:03:55 EST 2013
- Create/destroy the gadget at udc's init and destory function
- start/stop API are used at otg id switch and probe routine
- Defer some gadget operations at ci's delayed work queue
Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
drivers/usb/chipidea/ci.h | 1 -
drivers/usb/chipidea/core.c | 78 +++++++++++++++++--------------------------
drivers/usb/chipidea/host.c | 6 +++
drivers/usb/chipidea/host.h | 4 ++-
drivers/usb/chipidea/udc.c | 37 +++++++++++++++-----
drivers/usb/chipidea/udc.h | 4 ++-
6 files changed, 71 insertions(+), 59 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 325d790..3ebe87a 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -205,7 +205,6 @@ static inline void ci_role_stop(struct ci13xxx *ci)
ci->roles[role]->stop(ci);
}
-
/******************************************************************************
* REGISTERS
*****************************************************************************/
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 8857b2c..dd1fd87 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -323,27 +323,16 @@ static void ci_handle_id_switch(struct ci13xxx *ci)
ci_role(ci)->name, ci->roles[role]->name);
/* 1. Finish the current role */
- if (ci->role == CI_ROLE_GADGET) {
- usb_gadget_vbus_disconnect(&ci->gadget);
- /* host doesn't care B_SESSION_VALID event */
- ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
- ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
- ci->role = CI_ROLE_END;
- /* reset controller */
- hw_device_reset(ci, USBMODE_CM_IDLE);
- } else if (ci->role == CI_ROLE_HOST) {
- ci_role_stop(ci);
- /* reset controller */
- hw_device_reset(ci, USBMODE_CM_IDLE);
- }
+ ci_role_stop(ci);
+ hw_device_reset(ci, USBMODE_CM_IDLE);
/* 2. Turn on/off vbus according to coming role */
- if (ci_otg_role(ci) == CI_ROLE_GADGET) {
+ if (role == CI_ROLE_GADGET) {
otg_set_vbus(&ci->otg, false);
/* wait vbus lower than OTGSC_BSV */
hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
CI_VBUS_STABLE_TIMEOUT);
- } else if (ci_otg_role(ci) == CI_ROLE_HOST) {
+ } else if (role == CI_ROLE_HOST) {
otg_set_vbus(&ci->otg, true);
/* wait vbus higher than OTGSC_AVV */
hw_wait_reg(ci, OP_OTGSC, OTGSC_AVV, OTGSC_AVV,
@@ -351,13 +340,7 @@ static void ci_handle_id_switch(struct ci13xxx *ci)
}
/* 3. Begin the new role */
- if (ci_otg_role(ci) == CI_ROLE_GADGET) {
- ci->role = role;
- ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
- ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
- } else if (ci_otg_role(ci) == CI_ROLE_HOST) {
- ci_role_start(ci, role);
- }
+ ci_role_start(ci, role);
}
}
@@ -396,8 +379,24 @@ static void ci_delayed_work(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct ci13xxx *ci = container_of(dwork, struct ci13xxx, dwork);
- otg_set_vbus(&ci->otg, true);
+ if (ci->role == CI_ROLE_GADGET) {
+ /*
+ * if it is device mode:
+ * - Enable vbus detect
+ * - If it has already connected to host, notify udc
+ */
+ ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+ ci_handle_vbus_change(ci);
+ } else if (ci->is_otg && (ci->role == CI_ROLE_HOST)) {
+ /* USB Device at the MicroB to A cable */
+ otg_set_vbus(&ci->otg, true);
+ }
+}
+static inline void ci_role_destroy(struct ci13xxx *ci)
+{
+ ci_hdrc_gadget_destroy(ci);
+ ci_hdrc_host_destroy(ci);
}
static ssize_t show_role(struct device *dev, struct device_attribute *attr,
@@ -594,7 +593,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ret = ci_hdrc_gadget_init(ci);
if (ret)
- dev_info(dev, "doesn't support gadget\n");
+ dev_info(dev, "doesn't support gadget, ret=%d\n", ret);
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
dev_err(dev, "no supported roles\n");
@@ -616,23 +615,9 @@ static int ci_hdrc_probe(struct platform_device *pdev)
: CI_ROLE_GADGET;
}
- ret = ci_role_start(ci, ci->role);
- if (ret) {
- dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
- ret = -ENODEV;
- goto rm_wq;
- }
+ ci_role_start(ci, ci->role);
otgsc = hw_read(ci, OP_OTGSC, ~0);
- /*
- * if it is device mode:
- * - Enable vbus detect
- * - If it has already connected to host, notify udc
- */
- if (ci->role == CI_ROLE_GADGET) {
- ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
- ci_handle_vbus_change(ci);
- }
platform_set_drvdata(pdev, ci);
ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
@@ -642,18 +627,17 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ret = device_create_file(dev, &dev_attr_role);
if (ret)
- goto rm_attr;
+ goto free_irq;
- /* Handle the situation that usb device at the MicroB to A cable */
- if (ci->is_otg && !(otgsc & OTGSC_ID))
- queue_delayed_work(ci->wq, &ci->dwork, msecs_to_jiffies(500));
+ /* Defer some operations */
+ queue_delayed_work(ci->wq, &ci->dwork, msecs_to_jiffies(200));
return ret;
-rm_attr:
- device_remove_file(dev, &dev_attr_role);
+free_irq:
+ free_irq(ci->irq, ci);
stop:
- ci_role_stop(ci);
+ ci_role_destroy(ci);
rm_wq:
flush_workqueue(ci->wq);
destroy_workqueue(ci->wq);
@@ -669,7 +653,7 @@ static int ci_hdrc_remove(struct platform_device *pdev)
destroy_workqueue(ci->wq);
device_remove_file(ci->dev, &dev_attr_role);
free_irq(ci->irq, ci);
- ci_role_stop(ci);
+ ci_role_destroy(ci);
return 0;
}
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 8e9d312..ead3158 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -105,3 +105,9 @@ int ci_hdrc_host_init(struct ci13xxx *ci)
return 0;
}
+
+void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{
+ if (ci->role == CI_ROLE_HOST)
+ host_stop(ci);
+}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
index 761fb1f..5fd03a4 100644
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -4,13 +4,15 @@
#ifdef CONFIG_USB_CHIPIDEA_HOST
int ci_hdrc_host_init(struct ci13xxx *ci);
-
+void ci_hdrc_host_destroy(struct ci13xxx *ci);
#else
static inline int ci_hdrc_host_init(struct ci13xxx *ci)
{
return -ENXIO;
}
+static void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{}
#endif
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 83e54bb..e82dae4 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -31,6 +31,7 @@
#include "ci.h"
#include "udc.h"
+#include "otg.h"
#include "bits.h"
#include "debug.h"
@@ -1743,7 +1744,12 @@ static int udc_start(struct ci13xxx *ci)
if (!IS_ERR_OR_NULL(ci->transceiver)) {
retval = otg_set_peripheral(ci->transceiver->otg,
&ci->gadget);
- if (retval)
+ /*
+ * If we implement all USB functions using chipidea drivers,
+ * it doesn't need to call above API, meanwhile, if we only
+ * use gadget function, calling above API is useless.
+ */
+ if (retval && retval != -ENOTSUPP)
goto remove_dbg;
}
@@ -1780,12 +1786,27 @@ free_qh_pool:
return retval;
}
+static int udc_id_switch_for_device(struct ci13xxx *ci)
+{
+ ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+ ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+
+ return 0;
+}
+
+static void udc_id_switch_for_host(struct ci13xxx *ci)
+{
+ /* host doesn't care B_SESSION_VALID event */
+ ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+ ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
+}
+
/**
- * udc_remove: parent remove must call this to remove UDC
+ * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
*
* No interrupts active, the IRQ has been released
*/
-static void udc_stop(struct ci13xxx *ci)
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
{
if (ci == NULL)
return;
@@ -1804,15 +1825,13 @@ static void udc_stop(struct ci13xxx *ci)
}
dbg_remove_files(&ci->gadget.dev);
device_unregister(&ci->gadget.dev);
- /* my kobject is dynamic, I swear! */
- memset(&ci->gadget, 0, sizeof(ci->gadget));
}
/**
* ci_hdrc_gadget_init - initialize device related bits
* ci: the controller
*
- * This function enables the gadget role, if the device is "device capable".
+ * This function initializes gadget, if the device is "device capable".
*/
int ci_hdrc_gadget_init(struct ci13xxx *ci)
{
@@ -1825,11 +1844,11 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci)
if (!rdrv)
return -ENOMEM;
- rdrv->start = udc_start;
- rdrv->stop = udc_stop;
+ rdrv->start = udc_id_switch_for_device;
+ rdrv->stop = udc_id_switch_for_host;
rdrv->irq = udc_irq;
rdrv->name = "gadget";
ci->roles[CI_ROLE_GADGET] = rdrv;
- return 0;
+ return udc_start(ci);
}
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index 4ff2384..6c42d49 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -80,6 +80,7 @@ struct ci13xxx_req {
#ifdef CONFIG_USB_CHIPIDEA_UDC
int ci_hdrc_gadget_init(struct ci13xxx *ci);
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci);
#else
@@ -87,7 +88,8 @@ static inline int ci_hdrc_gadget_init(struct ci13xxx *ci)
{
return -ENXIO;
}
-
+static void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
+{}
#endif
#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */
--
1.7.0.4
More information about the linux-arm-kernel
mailing list