[PATCH 9/9] gpiolib: dynamically allocate descriptors array
Alexandre Courbot
acourbot at nvidia.com
Sat Feb 2 11:29:32 EST 2013
Allocate the GPIO descriptor's memory dynamically when GPIO chips are
added instead of using the static gpio_desc[] array. gpio_desc[] is now
totally unused and therefore removed.
Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
drivers/gpio/gpiolib.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 0247c48..893cf94 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -41,7 +41,7 @@
#define extra_checks 0
#endif
-/* gpio_lock prevents conflicts during gpio_desc[] table updates.
+/* gpio_lock prevents conflicts during gpio descriptors updates.
* While any GPIO is requested, its gpio_chip is not removable;
* each GPIO's "requested" flag serves as a lock and refcount.
*/
@@ -70,7 +70,6 @@ struct gpio_desc {
const char *label;
#endif
};
-static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
#define GPIO_OFFSET_VALID(chip, offset) (offset >= 0 && offset < chip->ngpio)
@@ -1163,6 +1162,13 @@ int gpiochip_add(struct gpio_chip *chip)
goto fail;
}
+ chip->desc = kzalloc(sizeof(struct gpio_desc) * chip->ngpio,
+ GFP_KERNEL);
+ if (!chip->desc) {
+ status = -ENOMEM;
+ goto fail;
+ }
+
spin_lock_irqsave(&gpio_lock, flags);
if (base < 0) {
@@ -1177,8 +1183,6 @@ int gpiochip_add(struct gpio_chip *chip)
status = gpiochip_add_to_list(chip);
if (status == 0) {
- chip->desc = &gpio_desc[chip->base];
-
for (id = 0; id < chip->ngpio; id++) {
struct gpio_desc *desc = &chip->desc[id];
desc->chip = chip;
@@ -1218,6 +1222,8 @@ unlock:
return 0;
fail:
+ kfree(chip->desc);
+
/* failures here can mean systems won't boot... */
pr_err("gpiochip_add: gpios %d..%d (%s) failed to register\n",
chip->base, chip->base + chip->ngpio - 1,
@@ -1261,6 +1267,8 @@ int gpiochip_remove(struct gpio_chip *chip)
if (status == 0)
gpiochip_unexport(chip);
+ kfree(chip->desc);
+
return status;
}
EXPORT_SYMBOL_GPL(gpiochip_remove);
--
1.8.1.1
More information about the linux-arm-kernel
mailing list