[PATCH 5/5] ARM: OMAP3: Update clocksource timer selection

[Jon Hunter]

On 02/01/2013 02:41 AM, Bedia, Vaibhav wrote:
> Hi Jon,
> 
> On Wed, Jan 30, 2013 at 22:34:31, Hunter, Jon wrote:
>> When booting with device-tree for OMAP3 and AM335x devices and a gptimer
>> is used as the clocksource (which is always the case for AM335x), a
>> gptimer located in a power domain that is not always-on is selected.
>> Ideally we should use a gptimer located in a power domain that is always
>> on (such as the wake-up domain) so that time can be maintained during a
>> kernel suspend without keeping on additional power domains unnecessarily.
>>
>> In order to fix this so that we can select a gptimer located in a power
>> domain that is always-on, the following changes were made ...
>> 1. Currently, only when selecting a gptimer to use for a clockevent
>>    timer, do we pass a timer property that can be used to select a
>>    specific gptimer. Change this so that we can pass a property when
>>    selecting a gptimer to use for a clocksource timer too.
>> 2. Currently, when selecting either a gptimer to use for a clockevent
>>    timer or a clocksource timer and no timer property is passed, then
>>    the first available timer is selected regardless of the properties
>>    it has. Change this so that if no properties are passed, then a timer
>>    that does not have additional features (such as always-on, dsp-irq,
>>    pwm, and secure) is selected.
>>
>> Please note that using a gptimer for both clocksource and clockevents
>> can have a system power impact during idle. The reason being is that
>> OMAP and AMxxx devices typically only have one gptimer in a power domain
>> that is always-on. Therefore when the kernel is idle both the clocksource
>> and clockevent timers will be active and this will keep additional power
>> domains on. During kernel suspend, only the clocksource timer is active
>> and therefore, it is better to use a gptimer in a power domain that is
>> always-on for clocksource.
>>
> 
> It's always a pleasure reading the changelog in your patches :)

Thanks.

> [...]
>>  
>>  #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
>> -OMAP_SYS_GP_TIMER_INIT(3, 1, "timer_sys_ck", "ti,timer-alwon",
>> -		       2, "timer_sys_ck");
>> +OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
>> +		       1, "timer_sys_ck", "ti,timer-alwon");
>>  #endif
>>
> 
> Minor point... was the intention of changing of clkev_nr and clksrc_nr to make
> it consistent with what happens on AM33xx which is DT-only?

I don't see this as being DT specific. It is more of a policy change to
ensure a wake-up domain timer is used for clocksource when we are using
gptimers for both clocksource and clockevents. It was your patch for
AM335x that made me see the need for this, if that makes sense. May be I
should have referenced that in the changelog.

Cheers
Jon