[PATCH v2 4/7] ARM: dts: imx27 pinctrl

Markus Pargmann mpa at pengutronix.de
Sat Aug 31 02:31:03 EDT 2013


On Wed, Aug 21, 2013 at 09:30:36AM +0800, Shawn Guo wrote:
> On Mon, Aug 19, 2013 at 04:07:11PM +0200, Markus Pargmann wrote:
> > Pinctrl driver node and pin group definitions for other driver nodes.
> > 
> > Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> > ---
> >  arch/arm/boot/dts/imx27.dtsi | 84 ++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 84 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
> > index 76cd89f..b9477d6 100644
> > --- a/arch/arm/boot/dts/imx27.dtsi
> > +++ b/arch/arm/boot/dts/imx27.dtsi
> > @@ -10,6 +10,7 @@
> >   */
> >  
> >  #include "skeleton.dtsi"
> > +#include "imx27-pinfunc.h"
> >  
> >  / {
> >  	aliases {
> > @@ -235,6 +236,89 @@
> >  				status = "disabled";
> >  			};
> >  
> > +			iomuxc: iomuxc at 10015000 {
> > +				compatible = "fsl,imx27-iomuxc";
> > +				reg = <0x10015000 0x600>;
> > +
> > +				fec {
> > +					pinctrl_fec_1: fec-1 {
> > +						fsl,pins = <
> > +							MX27_PAD_SD3_CMD__FEC_TXD0 0x0
> > +							MX27_PAD_SD3_CLK__FEC_TXD1 0x0
> > +							MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
> > +							MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
> > +							MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
> > +							MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
> > +							MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
> > +							MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
> > +							MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
> > +							MX27_PAD_ATA_DATA7__FEC_MDC 0x0
> > +							MX27_PAD_ATA_DATA8__FEC_CRS 0x0
> > +							MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
> > +							MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
> > +							MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
> > +							MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
> > +							MX27_PAD_ATA_DATA13__FEC_COL 0x0
> > +							MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
> > +							MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
> > +						>;
> > +					};
> > +				};
> 
> I like the idea [1] from Alexander Shiyan that maintains all these
> pinctrl setting entries outside the main device nodes structure.  Can
> you please do that for imx27.dtsi from the beginning?

Yes, the seperation looks better, I changed it.

Regards,

Markus

> 
> Shawn
> 
> [1] http://article.gmane.org/gmane.linux.ports.arm.kernel/260404
> 
> > +
> > +				i2c {
> > +					pinctrl_i2c_1: i2c-1 {
> > +						fsl,pins = <
> > +							MX27_PAD_I2C_DATA__I2C_DATA 0x0
> > +							MX27_PAD_I2C_CLK__I2C_CLK 0x0
> > +						>;
> > +					};
> > +
> > +					pinctrl_i2c_2: i2c-2 {
> > +						fsl,pins = <
> > +							MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
> > +							MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
> > +						>;
> > +					};
> > +				};
> > +
> > +				owire {
> > +					pinctrl_owire_1: owire-1 {
> > +						fsl,pins = <
> > +							MX27_PAD_RTCK__OWIRE 0x0
> > +						>;
> > +					};
> > +				};
> > +
> > +				uart {
> > +					pinctrl_uart_1: uart-1 {
> > +						fsl,pins = <
> > +							MX27_PAD_UART1_TXD__UART1_TXD 0x0
> > +							MX27_PAD_UART1_RXD__UART1_RXD 0x0
> > +							MX27_PAD_UART1_CTS__UART1_CTS 0x0
> > +							MX27_PAD_UART1_RTS__UART1_RTS 0x0
> > +						>;
> > +					};
> > +
> > +					pinctrl_uart_2: uart-2 {
> > +						fsl,pins = <
> > +							MX27_PAD_UART2_TXD__UART2_TXD 0x0
> > +							MX27_PAD_UART2_RXD__UART2_RXD 0x0
> > +							MX27_PAD_UART2_CTS__UART2_CTS 0x0
> > +							MX27_PAD_UART2_RTS__UART2_RTS 0x0
> > +						>;
> > +					};
> > +
> > +					pinctrl_uart_3: uart-3 {
> > +						fsl,pins = <
> > +							MX27_PAD_UART3_TXD__UART3_TXD 0x0
> > +							MX27_PAD_UART3_RXD__UART3_RXD 0x0
> > +							MX27_PAD_UART3_CTS__UART3_CTS 0x0
> > +							MX27_PAD_UART3_RTS__UART3_RTS 0x0
> > +						>;
> > +					};
> > +				};
> > +			};
> > +
> >  			gpio1: gpio at 10015000 {
> >  				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
> >  				reg = <0x10015000 0x100>;
> > -- 
> > 1.8.4.rc3
> > 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list