[PATCH v4 0/5] clk: dt: bindings for mux, divider & gate clocks

Tero Kristo t-kristo at ti.com
Fri Aug 30 03:05:34 EDT 2013

On 08/29/2013 09:23 PM, Santosh Shilimkar wrote:
> Mike,
> On Thursday 22 August 2013 01:53 AM, Mike Turquette wrote:
>> This series introduces binding definitions for common register-mapped
>> clock multiplexer, divider and gate IP blocks along with the
>> corresponding setup functions for matching DT data.  The bindings are
>> similar to the struct definitions but please don't hold that against the
>> binding: the struct definitions closely model the hardware register
>> layout.
>> The delta from v3 is very small and only consists of cosmetic changes
>> and one functional change for better error handling.
>> Changes since v3:
>> * added Tested-by & Reviewed-by from Heiko
>> * replaced underscores with dashes in DT property names
>> * bail from of clock setup function early if of_iomap fails
>> * removed unecessary explict cast
>> Mike Turquette (5):
>>    clk: divider: replace bitfield width with mask
>>    clk: of: helper for determining number of parent clocks
>>    clk: dt: binding for basic multiplexer clock
>>    clk: dt: binding for basic divider clock
>>    clk: dt: binding for basic gate clock
> I have used $subject series as the base for the Keystone
> ccf support and tested these patches on Keystone EVM. Will
> post those patches soon on the lists.
> For the series if you need more tested-by tags, feel free to
> add,
> Tested-by: Santosh Shilimkar <santosh.shilimkar at ti.com>

Oh yea, same for my set I posted yesterday. Used this as basis for 
O3/O4/O5/DRA7/AM335x tests, so you can also add my Tested-by tag if you 
need one.


More information about the linux-arm-kernel mailing list