[PATCH 1/2] ARM: Dove: Add the audio devices in DT
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Thu Aug 29 14:02:27 EDT 2013
On 08/29/13 19:12, Mark Brown wrote:
> On Thu, Aug 29, 2013 at 05:33:58PM +0100, Russell King - ARM Linux wrote:
>> On Thu, Aug 29, 2013 at 05:12:17PM +0100, Mark Brown wrote:
>>> On Wed, Aug 28, 2013 at 12:26:31PM +0200, Sebastian Hesselbarth wrote:
>
>>>> Also, we'll need to distinguish between the different audio controllers
>>>> on a single SoC, i.e. i2s0 and i2s1. I suggest checking the (phys) reg
>>>> base passed.
>
>>> Why is this required - ideally this would have been mentioned in some of
>>> the previous reviews...
>
>> I've mentioned the differences between the blocks to you repeatedly in
>> our massive thread, including that some contain the block with different
>
> You have described some additional features which will require
> additional driver support. I would expect that the device tree bindings
> for these features would be added as the features are added and the DTS
> files updated, for example by listing additional compatible strings if
> that was the binding update, as is the normal practice. Obviously any
> hardware which is not compatible with the current binding should not be
> being registered using the current binding.
>
> It is not clear from the above comment by Sebastian if he is referring
> to the same set of hardware differences or something new - doing things
> based on device address is highly unusual, it sounds like something to
> do with the integration into the SoC rather than to do with the IP.
>
Mark,
it is referring the same differences Russell already mentioned. But I
already came to the conclusion, that we don't need the information in
the binding. For example, if you use that controller on Dove and you
hook it up for SPDIF-in (which it hasn't), than I consider this a
DT bug. No need to double-check that in the driver. From that p-o-v,
please just let the current binding as is.
Thomas Petazzoni mentioned earlier, that the _usual_ procedure to
name the compatibles is to pick the SoC that the IP appeared in first.
But I am also fine with "marvell,mvebu-audio" and adding compatibles
for dove or kirkwood _if_ we will ever need them.
Please, just stop fighting over this again - it is not getting anything
any further.
Sebastian
More information about the linux-arm-kernel
mailing list