[PATCH v2 2/3] ARM: OMAP4+: Move SRAM data to DT

[Rajendra Nayak]

On Thursday 29 August 2013 07:01 PM, Santosh Shilimkar wrote:
> On Thursday 29 August 2013 09:26 AM, Sekhar Nori wrote:
>> On 8/29/2013 4:53 PM, Rajendra Nayak wrote:
>>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>>> index 22d9f2b..1ba6a77 100644
>>> --- a/arch/arm/boot/dts/omap4.dtsi
>>> +++ b/arch/arm/boot/dts/omap4.dtsi
>>> @@ -126,6 +126,11 @@
>>>  			pinctrl-single,function-mask = <0x7fff>;
>>>  		};
>>>  
>>> +		ocmcram: ocmcram at 40304000 {
>>
>> This can now be changed to 0x40300000 now that you have moved to
>> gen_pool_alloc()?
>>
> NO.
> It won't work on secure devices since first 16 KB is occupied for
> default configuration. Its not worth trouble also to handle
> secure/non-secure considering the use of SRAM which is actually just
> limited to errata. 40304000 will work for both devices.

Right. Sekhar, you might have confused because of the existing buggy code
in sram.c and sram.h which did this (and is removed in this series)

from sram.c
-----------
 #define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA	OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA		0x40300000
 
from sram.h
-----------
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA		0x40304000
-#define OMAP4_SRAM_VA		0xfe404000
-#else
-#define OMAP4_SRAM_PA		0x40300000
-#endif

I am not sure where the checks for CONFIG_OMAP4_ERRATA_I688
came in from, but these are done, like Santosh said, to handle
secure and non-secure sram across GP and HS devices and in
no way related to handling errata I688.

> 
> Regards,
> Santosh
>