[PATCH] ARM: imx6sl: config iomux-gpr1 to select clock for fec

[Shawn Guo]

On Thu, Aug 22, 2013 at 06:56:31PM +0800, Fugang Duan wrote:
> Config iomux-gpr1 to select clock source for fec system clock.
> Clear gpr1[14], gpr1[18-17] bit to select the fec clock source
> from internal anatop PLL.
> 
> Signed-off-by: Fugang Duan  <B38611 at freescale.com>
> ---
>  arch/arm/mach-imx/mach-imx6sl.c |   20 ++++++++++++++++++++
>  1 files changed, 20 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
> index 132db26..e0a8c12 100644
> --- a/arch/arm/mach-imx/mach-imx6sl.c
> +++ b/arch/arm/mach-imx/mach-imx6sl.c
> @@ -11,17 +11,37 @@
>  #include <linux/irqchip.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>

Put <linux/regmap.h> here to sort them properly.

>  #include <asm/hardware/cache-l2x0.h>
>  #include <asm/mach/arch.h>
>  #include <asm/mach/map.h>
>  
>  #include "common.h"
>  
> +static void __init imx6sl_fec_init(void)
> +{
> +	struct regmap *gpr;
> +
> +	/* set FEC clock from internal PLL clock source */
> +	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
> +	if (!IS_ERR(gpr)) {
> +		regmap_update_bits(gpr, IOMUXC_GPR1,
> +			IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
> +		regmap_update_bits(gpr, IOMUXC_GPR1,
> +			IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
> +	} else
> +		pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");

	} else {
		pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
	}

Shawn

> +}
> +
>  static void __init imx6sl_init_machine(void)
>  {
>  	mxc_arch_reset_init_dt();
>  
>  	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +
> +	imx6sl_fec_init();
>  }
>  
>  static void __init imx6sl_init_irq(void)
> -- 
> 1.7.1
> 
>