[PATCH] clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem

[Mike Turquette]

Quoting Rahul Sharma (2013-08-23 00:16:59)
> parent of hdmi and mixer block is mentioned as aclk200 which is
> not correct. It is clocked by the ouput of aclk200_disp1. Hence
> parent for mixer and hdmi clocks is changed to aclk200_disp1.
> 
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>

Taken into clk-next.

Thanks,
Mike

> ---
> This set is based on Mike's clk-next branch at
> https://git.linaro.org/gitweb?p=people/mturquette/linux.git
> 
>  drivers/clk/samsung/clk-exynos5250.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index a9916a4..d90e593 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
>         GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
>         GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
>         GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
> -       GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
> -       GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> +       GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
> +       GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
>         GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
>  };
>  
> -- 
> 1.7.10.4