[PATCH 3/5] ARM: shmobile: lager: Add Display Unit support

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

Only the VGA output is currently supported.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/mach-shmobile/board-lager.c | 66 ++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 9806ca0..5facfc9 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -28,6 +28,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -38,6 +39,62 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data lager_du_pdata __initconst = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &du_resources,
+		.size_data = sizeof(du_resources),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led lager_leds[] = {
 	{
@@ -107,6 +164,13 @@ static const struct resource ether_resources[] __initconst = {
 };
 
 static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_rgb666", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_sync_1", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_clk_out_0", "du"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
@@ -154,6 +218,8 @@ static void __init lager_add_standard_devices(void)
 					  ether_resources,
 					  ARRAY_SIZE(ether_resources),
 					  &ether_pdata, sizeof(ether_pdata));
+
+	lager_add_du_device();
 }
 
 static const char * const lager_boards_compat_dt[] __initconst = {
-- 
1.8.3.2