[PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string

[Boris BREZILLON]

Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
documentation.

Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
 .../bindings/pinctrl/atmel,at91-pinctrl.txt        |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 648d60e..cf7c7bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
 such as pull-up, multi drive, etc.
 
 Required properties for iomux controller:
-- compatible: "atmel,at91rm9200-pinctrl"
+- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
 - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
   configured in this periph mode. All the periph and bank need to be describe.
 
-- 
1.7.9.5