[PATCH v3 5/6] iio: at91: move the num_channels from DT to driver itself

Josh Wu josh.wu at atmel.com
Tue Aug 27 07:28:51 EDT 2013


CC: devicetree at vger.kernel.org
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 Documentation/devicetree/bindings/arm/atmel-adc.txt |    1 -
 drivers/iio/adc/at91_adc.c                          |   12 +++++-------
 2 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index 723c205..0e65e01 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -7,7 +7,6 @@ Required properties:
   - interrupts: Should contain the IRQ line for the ADC
   - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
     device
-  - atmel,adc-num-channels: Number of channels available in the ADC
   - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
     defined in the datasheet
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index f32a69d..bd72b0e 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -43,6 +43,7 @@ struct at91_adc_caps {
 	/* startup time calculate function */
 	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
 
+	u8	num_channels;
 	struct at91_adc_reg_desc registers;
 };
 
@@ -502,13 +503,6 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
 	}
 	st->channels_mask = prop;
 
-	if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
-		dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	st->num_channels = prop;
-
 	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
 
 	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
@@ -534,6 +528,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
 		goto error_ret;
 
 	st->registers = &st->caps->registers;
+	st->num_channels = &st->caps->num_channels;
 	st->trigger_number = of_get_child_count(node);
 	st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
 					sizeof(struct at91_adc_trigger),
@@ -788,6 +783,7 @@ static int at91_adc_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static struct at91_adc_caps at91sam9260_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9260,
+	.num_channels = 4;
 	.registers = {
 		.channel_base = AT91_ADC_CHR(0),
 		.drdy_mask = AT91_ADC_DRDY,
@@ -800,6 +796,7 @@ static struct at91_adc_caps at91sam9260_caps = {
 
 static struct at91_adc_caps at91sam9g45_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9260,	/* same as 9260 */
+	.num_channels = 8;
 	.registers = {
 		.channel_base = AT91_ADC_CHR(0),
 		.drdy_mask = AT91_ADC_DRDY,
@@ -812,6 +809,7 @@ static struct at91_adc_caps at91sam9g45_caps = {
 
 static struct at91_adc_caps at91sam9x5_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9x5,
+	.num_channels = 12;
 	.registers = {
 		.channel_base = AT91_ADC_CDR0_9X5,
 		.drdy_mask = AT91_ADC_SR_DRDY_9X5,
-- 
1.7.10




More information about the linux-arm-kernel mailing list