[PATCH v7 1/4] drivers: dma-contiguous: clean source code and prepare for device tree
Marek Szyprowski
m.szyprowski at samsung.com
Mon Aug 26 10:39:16 EDT 2013
This patch cleans the initialization of dma contiguous framework. The
all-in-one dma_declare_contiguous() function is now separated into
dma_contiguous_reserve_area() which only steals the the memory from
memblock allocator and dma_contiguous_add_device() function, which
assigns given device to the specified reserved memory area. This improves
the flexibility in defining contiguous memory areas and assigning device
to them, because now it is possible to assign more than one device to
the given contiguous memory area. Such split in initialization procedure
is also required for upcoming device tree support.
Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
Acked-by: Michal Nazarewicz <mina86 at mina86.com>
Acked-by: Tomasz Figa <t.figa at samsung.com>
---
arch/arm/include/asm/dma-contiguous.h | 1 -
arch/x86/include/asm/dma-contiguous.h | 1 -
drivers/base/dma-contiguous.c | 119 ++++++++++++---------------------
include/asm-generic/dma-contiguous.h | 28 --------
include/linux/device.h | 2 +-
include/linux/dma-contiguous.h | 62 ++++++++++++++++-
6 files changed, 105 insertions(+), 108 deletions(-)
delete mode 100644 include/asm-generic/dma-contiguous.h
diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h
index e072bb2..4f8e9e5 100644
--- a/arch/arm/include/asm/dma-contiguous.h
+++ b/arch/arm/include/asm/dma-contiguous.h
@@ -5,7 +5,6 @@
#ifdef CONFIG_DMA_CMA
#include <linux/types.h>
-#include <asm-generic/dma-contiguous.h>
void dma_contiguous_early_fixup(phys_addr_t base, unsigned long size);
diff --git a/arch/x86/include/asm/dma-contiguous.h b/arch/x86/include/asm/dma-contiguous.h
index c092416..b4b38ba 100644
--- a/arch/x86/include/asm/dma-contiguous.h
+++ b/arch/x86/include/asm/dma-contiguous.h
@@ -4,7 +4,6 @@
#ifdef __KERNEL__
#include <linux/types.h>
-#include <asm-generic/dma-contiguous.h>
static inline void
dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) { }
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
index 0ca5442..4b94c91 100644
--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -96,7 +96,7 @@ static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
#endif
/**
- * dma_contiguous_reserve() - reserve area for contiguous memory handling
+ * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling
* @limit: End address of the reserved memory (optional, 0 for any).
*
* This function reserves memory from early allocator. It should be
@@ -124,22 +124,29 @@ void __init dma_contiguous_reserve(phys_addr_t limit)
#endif
}
- if (selected_size) {
+ if (selected_size && !dma_contiguous_default_area) {
pr_debug("%s: reserving %ld MiB for global area\n", __func__,
(unsigned long)selected_size / SZ_1M);
- dma_declare_contiguous(NULL, selected_size, 0, limit);
+ dma_contiguous_reserve_area(selected_size, 0, limit,
+ &dma_contiguous_default_area);
}
};
static DEFINE_MUTEX(cma_mutex);
-static __init int cma_activate_area(unsigned long base_pfn, unsigned long count)
+static __init int cma_activate_area(struct cma *cma)
{
- unsigned long pfn = base_pfn;
- unsigned i = count >> pageblock_order;
+ int bitmap_size = BITS_TO_LONGS(cma->count) * sizeof(long);
+ unsigned long base_pfn = cma->base_pfn, pfn = base_pfn;
+ unsigned i = cma->count >> pageblock_order;
struct zone *zone;
+ cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+
+ if (!cma->bitmap)
+ return -ENOMEM;
+
WARN_ON_ONCE(!pfn_valid(pfn));
zone = page_zone(pfn_to_page(pfn));
@@ -153,92 +160,53 @@ static __init int cma_activate_area(unsigned long base_pfn, unsigned long count)
}
init_cma_reserved_pageblock(pfn_to_page(base_pfn));
} while (--i);
- return 0;
-}
-
-static __init struct cma *cma_create_area(unsigned long base_pfn,
- unsigned long count)
-{
- int bitmap_size = BITS_TO_LONGS(count) * sizeof(long);
- struct cma *cma;
- int ret = -ENOMEM;
-
- pr_debug("%s(base %08lx, count %lx)\n", __func__, base_pfn, count);
-
- cma = kmalloc(sizeof *cma, GFP_KERNEL);
- if (!cma)
- return ERR_PTR(-ENOMEM);
-
- cma->base_pfn = base_pfn;
- cma->count = count;
- cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
- if (!cma->bitmap)
- goto no_mem;
-
- ret = cma_activate_area(base_pfn, count);
- if (ret)
- goto error;
-
- pr_debug("%s: returned %p\n", __func__, (void *)cma);
- return cma;
-
-error:
- kfree(cma->bitmap);
-no_mem:
- kfree(cma);
- return ERR_PTR(ret);
+ return 0;
}
-static struct cma_reserved {
- phys_addr_t start;
- unsigned long size;
- struct device *dev;
-} cma_reserved[MAX_CMA_AREAS] __initdata;
-static unsigned cma_reserved_count __initdata;
+static struct cma cma_areas[MAX_CMA_AREAS];
+static unsigned cma_area_count;
static int __init cma_init_reserved_areas(void)
{
- struct cma_reserved *r = cma_reserved;
- unsigned i = cma_reserved_count;
-
- pr_debug("%s()\n", __func__);
+ int i;
- for (; i; --i, ++r) {
- struct cma *cma;
- cma = cma_create_area(PFN_DOWN(r->start),
- r->size >> PAGE_SHIFT);
- if (!IS_ERR(cma))
- dev_set_cma_area(r->dev, cma);
+ for (i = 0; i < cma_area_count; i++) {
+ int ret = cma_activate_area(&cma_areas[i]);
+ if (ret)
+ return ret;
}
+
return 0;
}
core_initcall(cma_init_reserved_areas);
/**
- * dma_declare_contiguous() - reserve area for contiguous memory handling
- * for particular device
- * @dev: Pointer to device structure.
- * @size: Size of the reserved memory.
- * @base: Start address of the reserved memory (optional, 0 for any).
+ * dma_contiguous_reserve_area() - reserve custom contiguous area
+ * @size: Size of the reserved area (in bytes),
+ * @base: Base address of the reserved area optional, use 0 for any
* @limit: End address of the reserved memory (optional, 0 for any).
+ * @res_cma: Pointer to store the created cma region.
*
- * This function reserves memory for specified device. It should be
- * called by board specific code when early allocator (memblock or bootmem)
- * is still activate.
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory. This function allows to create custom reserved areas for specific
+ * devices.
*/
-int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
- phys_addr_t base, phys_addr_t limit)
+int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
+ phys_addr_t limit, struct cma **res_cma)
{
- struct cma_reserved *r = &cma_reserved[cma_reserved_count];
+ struct cma *cma = &cma_areas[cma_area_count];
phys_addr_t alignment;
+ int ret = 0;
pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__,
(unsigned long)size, (unsigned long)base,
(unsigned long)limit);
/* Sanity checks */
- if (cma_reserved_count == ARRAY_SIZE(cma_reserved)) {
+ if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
return -ENOSPC;
}
@@ -256,7 +224,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
if (base) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
- base = -EBUSY;
+ ret = -EBUSY;
goto err;
}
} else {
@@ -266,7 +234,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
*/
phys_addr_t addr = __memblock_alloc_base(size, alignment, limit);
if (!addr) {
- base = -ENOMEM;
+ ret = -ENOMEM;
goto err;
} else {
base = addr;
@@ -277,10 +245,11 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
* Each reserved area must be initialised later, when more kernel
* subsystems (like slab allocator) are available.
*/
- r->start = base;
- r->size = size;
- r->dev = dev;
- cma_reserved_count++;
+ cma->base_pfn = PFN_DOWN(base);
+ cma->count = size >> PAGE_SHIFT;
+ *res_cma = cma;
+ cma_area_count++;
+
pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
(unsigned long)base);
@@ -289,7 +258,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
return 0;
err:
pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
- return base;
+ return ret;
}
/**
diff --git a/include/asm-generic/dma-contiguous.h b/include/asm-generic/dma-contiguous.h
deleted file mode 100644
index 294b1e7..0000000
--- a/include/asm-generic/dma-contiguous.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASM_DMA_CONTIGUOUS_H
-#define ASM_DMA_CONTIGUOUS_H
-
-#ifdef __KERNEL__
-#ifdef CONFIG_CMA
-
-#include <linux/device.h>
-#include <linux/dma-contiguous.h>
-
-static inline struct cma *dev_get_cma_area(struct device *dev)
-{
- if (dev && dev->cma_area)
- return dev->cma_area;
- return dma_contiguous_default_area;
-}
-
-static inline void dev_set_cma_area(struct device *dev, struct cma *cma)
-{
- if (dev)
- dev->cma_area = cma;
- if (!dev && !dma_contiguous_default_area)
- dma_contiguous_default_area = cma;
-}
-
-#endif
-#endif
-
-#endif
diff --git a/include/linux/device.h b/include/linux/device.h
index 22b546a..8b2e2c0 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -727,7 +727,7 @@ struct device {
struct dma_coherent_mem *dma_mem; /* internal for coherent mem
override */
-#ifdef CONFIG_CMA
+#ifdef CONFIG_DMA_CMA
struct cma *cma_area; /* contiguous memory area for dma
allocations */
#endif
diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h
index 00141d3..3b28f93 100644
--- a/include/linux/dma-contiguous.h
+++ b/include/linux/dma-contiguous.h
@@ -67,9 +67,53 @@ struct device;
extern struct cma *dma_contiguous_default_area;
+static inline struct cma *dev_get_cma_area(struct device *dev)
+{
+ if (dev && dev->cma_area)
+ return dev->cma_area;
+ return dma_contiguous_default_area;
+}
+
+static inline void dev_set_cma_area(struct device *dev, struct cma *cma)
+{
+ if (dev)
+ dev->cma_area = cma;
+}
+
+static inline void dma_contiguous_set_default(struct cma *cma)
+{
+ dma_contiguous_default_area = cma;
+}
+
void dma_contiguous_reserve(phys_addr_t addr_limit);
-int dma_declare_contiguous(struct device *dev, phys_addr_t size,
- phys_addr_t base, phys_addr_t limit);
+
+int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
+ phys_addr_t limit, struct cma **res_cma);
+
+/**
+ * dma_declare_contiguous() - reserve area for contiguous memory handling
+ * for particular device
+ * @dev: Pointer to device structure.
+ * @size: Size of the reserved memory.
+ * @base: Start address of the reserved memory (optional, 0 for any).
+ * @limit: End address of the reserved memory (optional, 0 for any).
+ *
+ * This function reserves memory for specified device. It should be
+ * called by board specific code when early allocator (memblock or bootmem)
+ * is still activate.
+ */
+
+static inline int dma_declare_contiguous(struct device *dev, phys_addr_t size,
+ phys_addr_t base, phys_addr_t limit)
+{
+ struct cma *cma;
+ int ret;
+ ret = dma_contiguous_reserve_area(size, base, limit, &cma);
+ if (ret == 0)
+ dev_set_cma_area(dev, cma);
+
+ return ret;
+}
struct page *dma_alloc_from_contiguous(struct device *dev, int count,
unsigned int order);
@@ -80,8 +124,22 @@ bool dma_release_from_contiguous(struct device *dev, struct page *pages,
#define MAX_CMA_AREAS (0)
+static inline struct cma *dev_get_cma_area(struct device *dev)
+{
+ return NULL;
+}
+
+static inline void dev_set_cma_area(struct device *dev, struct cma *cma) { }
+
+static inline void dma_contiguous_set_default(struct cma *cma) { }
+
static inline void dma_contiguous_reserve(phys_addr_t limit) { }
+static inline int dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
+ phys_addr_t limit, struct cma **res_cma) {
+ return -ENOSYS;
+}
+
static inline
int dma_declare_contiguous(struct device *dev, phys_addr_t size,
phys_addr_t base, phys_addr_t limit)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list