[PATCH v2 2/2] ARM: at91/dt: define phy available on sama5d3 mother board

Sergei Shtylyov sergei.shtylyov at cogentembedded.com
Mon Aug 26 09:21:12 EDT 2013


Hello.

On 26-08-2013 16:35, Boris BREZILLON wrote:

> This patch describe the phy used on atmel sama5d3 mother board:
>   - phy address
>   - phy interrupt pin

> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
> ---
>   arch/arm/boot/dts/sama5d3xmb.dtsi |    8 ++++++++
>   1 file changed, 8 insertions(+)

> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
> index 8a9e05d..e9521d5 100644
> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
> @@ -81,6 +81,14 @@
>
>   			macb1: ethernet at f802c000 {
>   				phy-mode = "rmii";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				phy0: ethernet-phy at 0 {

    Address part of the node name doesn't match the "reg" property.

> +					interrupt-parent = <&pioE>;
> +					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
> +					reg = <1>;
> +				};

WBR, Sergei




More information about the linux-arm-kernel mailing list