[PATCH 7/7] watchdog: orion: Update device-tree binding documentation

Ezequiel Garcia ezequiel.garcia at free-electrons.com
Fri Aug 23 06:04:51 EDT 2013


On Thu, Aug 22, 2013 at 09:26:21PM -0400, Jason Cooper wrote:
> On Thu, Aug 22, 2013 at 11:41:58AM -0300, Ezequiel Garcia wrote:
> > Change the 'reg' property meaning, by defining three required cells.
> > It's important to note this commit breaks DT-compatibility for this
> > device.
> > 
> > Cc: devicetree at vger.kernel.org
> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
> > ---
> >  Documentation/devicetree/bindings/watchdog/orion-wdt.txt | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/orion-wdt.txt b/Documentation/devicetree/bindings/watchdog/orion-wdt.txt
> > index 5dc8d30..bb7f1a2 100644
> > --- a/Documentation/devicetree/bindings/watchdog/orion-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/orion-wdt.txt
> > @@ -3,7 +3,10 @@
> >  Required Properties:
> >  
> >  - Compatibility : "marvell,orion-wdt"
> > -- reg		: Address of the timer registers
> > +- reg		: Three cells are required.
> > +		  First  cell contains the global timer control register.
> > +		  Second cell contains the watchdog counter register.
> > +		  Third  cell contains the RSTOUT register.
> >  
> >  Optional properties:
> >  
> > @@ -13,7 +16,9 @@ Example:
> >  
> >  	wdt at 20300 {
> >  		compatible = "marvell,orion-wdt";
> > -		reg = <0x20300 0x28>;
> > +		reg = <0x20300 0x4
> > +		       0x20324 0x4
> > +		       0x20108 0x4>;
> 
> I don't like this.  It reaches outside of the wdt register.  I think a
> more clean way to do this is to do a provider/consumer relationship as
> in reset.txt.  eg, here you would retain the original reg binding, and
> add a reset phandle.
> 

Mmm... I can't see how this fits a reset-controller usage.

The watchdog simply "enables" the RSTOUT bit that allows the whole SoC
to be reset when the watchdog counter expires.

The reset-controller seems to be meant to send reset signals to devices,
which is not this case.

What am I missing?
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com



More information about the linux-arm-kernel mailing list