[PATCH v3 2/2] ARM: kirkwood: Add standby support
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Thu Aug 22 11:49:07 EDT 2013
Implements standby support for Kirkwood SoC. When the SoC enters
standby state the memory PM units are disabled, the DDR is set
in self-refresh mode, and the CPU is set in WFI.
At this point there's no clock gating, as that is considered each
driver's task.
Signed-off-by: Simon Guinot <sguinot at lacie.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
arch/arm/mach-kirkwood/Makefile | 2 +
arch/arm/mach-kirkwood/board-dt.c | 1 +
arch/arm/mach-kirkwood/common.c | 1 +
arch/arm/mach-kirkwood/common.h | 6 ++
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 2 +
arch/arm/mach-kirkwood/pm.c | 73 +++++++++++++++++++++++
6 files changed, 85 insertions(+)
create mode 100644 arch/arm/mach-kirkwood/pm.c
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index ac4cd75..ac78dcc 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,4 +1,6 @@
obj-y += common.o irq.o pcie.o mpp.o
+obj-$(CONFIG_PM) += pm.o
+
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 6e122ed..2d4a4aa 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -96,6 +96,7 @@ static void __init kirkwood_dt_init(void)
/* Setup root of clk tree */
kirkwood_of_clk_init();
+ kirkwood_pm_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index e9238b5..aceb68a 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -717,6 +717,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
+ kirkwood_pm_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fcf3ba6..2be1226 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,6 +58,12 @@ void kirkwood_cpufreq_init(void);
void kirkwood_restart(enum reboot_mode, const char *);
void kirkwood_clk_init(void);
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_DREAMPLUG_DT
void dreamplug_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 91242c9..8b9d1c9 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -78,4 +78,6 @@
#define CGC_TDM (1 << 20)
#define CGC_RESERVED (0x6 << 21)
+#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+
#endif
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
new file mode 100644
index 0000000..8783a71
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -0,0 +1,73 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel at free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot at lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, MEMORY_PM_CTRL);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ suspend_set_ops(&kirkwood_suspend_ops);
+ return 0;
+}
--
1.8.1.5
More information about the linux-arm-kernel
mailing list