[GIT PULL 3/3] ARM: shmobile: lager: enable Ether

Olof Johansson olof at lixom.net
Thu Aug 22 03:04:59 EDT 2013


On Thu, Aug 22, 2013 at 12:01 AM, Simon Horman <horms at verge.net.au> wrote:
> On Wed, Aug 21, 2013 at 11:53:25PM -0700, Olof Johansson wrote:
>> On Thu, Aug 22, 2013 at 09:16:49AM +0900, Simon Horman wrote:
>> > On Wed, Aug 21, 2013 at 11:13:30PM +0400, Sergei Shtylyov wrote:
>> > > Hello.
>> > >
>> > > On 08/21/2013 08:01 PM, Kevin Hilman wrote:
>> > >
>> > > >>Acked-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
>> > > >>Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
>> > >
>> > > >This one is triggering a new build failure in -next:
>> > >
>> > > >arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field 'register_type' specified in initializer
>> > > >arch/arm/mach-shmobile/board-lager.c:99:19: error: 'SH_ETH_REG_FAST_RCAR' undeclared here (not in a function)
>> > >
>> > > >>+/* Ether */
>> > > >>+static struct sh_eth_plat_data ether_pdata __initdata = {
>> > > >>+       .phy                    = 0x1,
>> > > >>+       .edmac_endian           = EDMAC_LITTLE_ENDIAN,
>> > > >>+       .register_type          = SH_ETH_REG_FAST_RCAR,
>> > >
>> > > >and it looks to be because this board is trying to use the register_type
>> > > >field which was removed by:
>> > >
>> > > >commit 8d3214c4e8c8be6efd8ec7a172239ebbd4deb04b
>> > > >Author: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
>> > > >Date:   Sun Aug 18 03:13:26 2013 +0400
>> > > >
>> > > >     sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'
>> > > >
>> > > >     Now that the 'register_type' field of the 'sh_eth' driver's platform data is not
>> > > >     used by the driver anymore, it's time to remove it and  its initializers from
>> > > >     the SH platform code. Also  move *enum* declaring values for this  field from
>> > > >     <linux/sh_eth.h>  to  the  local driver's  header file as they're only needed
>> > > >     by the driver itself  now...
>> > > >
>> > > >     Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
>> > > >     Signed-off-by: David S. Miller <davem at davemloft.net>
>> > >
>> > >    Looks like in this case I had no choice since R8A7790 support for
>> > > the 'sh_eth' driver will be added in 3.12 only, so if I merged these
>> > > patches thru the shmobile tree, we'd have gotten an error in the
>> > > driver...
>> > >    I guess it's too early to fix this in any particular tree except
>> > > for linux-next itself... let me know what I can do.
>> >
>> > This patch ("ARM: shmobile: lager: enable Ether") is also targeted at v3.12.
>> > So it seems to me that a fix for this could go through the shmobile tree
>> > if it is acceptable to merge net-next into the base of a pull-request.
>> >
>> > Kevin, Olof, could you give some guidance here.
>>
>> I don't think we want to pull in net-next here just for this -- that is a
>> massive branch.
>>
>> There's no great solution to any of this, unfortunately.
>>
>> I think easiest would be if we add a patch that fixes this up _only_ in
>> for-next, and merge the same patch upstream as soon as net-next lands
>> (if it lands after arm-soc, otherwise we include it in our branch),
>> that might be the least painful way to do this.
>>
>> That patch would just remove the assignment to register_type in the
>> board file.
>
> That is fine by me.
>
> I think it would be easiest to supply the patch to you as
> a patch in email rather than a pull request.
>
> Does that work for you?

Yes, definitely.


-Olof



More information about the linux-arm-kernel mailing list