[PATCH] arm: omap5: hwmod: add missing ocp2scp hwmod data

Benoit Cousson bcousson at baylibre.com
Wed Aug 21 08:11:21 EDT 2013


+ Kishon and Roger

Ok, so in fact that's a complete series now.

[v2,1/5] arm: omap5: dts: fix reg property size
[v2,2/5] arm: omap5: dts: fix ocp2scp DTS data
[v2,3/5] arm: omap5: dts: add palmas-usb node
[v2,4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data
[v2,5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies

Moreover, it does not build because of the change in the palmas SMPS10 regulator name from Kishon I already pulled.

Kishon or Roger,

Could you resend that series ASAP after fixing, testing and changing my email address?


Tony,

I will need your ack for the omap2plus_defconfig patch. 

Thanks,
Benoit 


On 21/08/2013 11:48, Benoit Cousson wrote:
> Gosh, I've just realized it does contain some DTS stuff in it as well :-(
> I should have pushed it in my DTS branch.
> 
> Benoit
> 
> 
> 2013/8/21 Benoit Cousson <bcousson at baylibre.com 
> <mailto:bcousson at baylibre.com>>
> 
>     On 21/08/2013 09:47, Tony Lindgren wrote:
> 
>         Benoit,
> 
>         Got this one queued up somewhere?
> 
> 
>     No yet. That's the only hwmod patch I have so far.
>     I'll put it in a branch and send you the pull-request ASAP.
> 
>     Regards,
>     Benoit
> 
> 
> 
>         * Felipe Balbi <balbi at ti.com <mailto:balbi at ti.com>> [130712 08:21]:
> 
>             From: Benoit Cousson <benoit.cousson at linaro.org
>             <mailto:benoit.cousson at linaro.org>>
> 
>             without that hwmod data, USB3 will not in OMAP5 boards.
> 
>             While at that, also fix DTS data to pass reg property,
>             otherwise driver won't probe.
> 
>             Signed-off-by: Benoit Cousson <benoit.cousson at linaro.org
>             <mailto:benoit.cousson at linaro.org>>
>             Signed-off-by: Felipe Balbi <balbi at ti.com <mailto:balbi at ti.com>>
>             ---
> 
>             tested on OMAP5 uEVM. Gets rid of a data abort when USB3
>             is enabled. There still some other patches missing to get
>             USB3 working out of the box, but that's on Palmas and will
>             come as soon as I get those ready.
> 
>             This is already on step forward.
> 
>                arch/arm/boot/dts/omap5.dtsi               |  3 +-
>                arch/arm/mach-omap2/omap___hwmod_54xx_data.c | 45
>             ++++++++++++++++++++++++++++++
>                2 files changed, 47 insertions(+), 1 deletion(-)
> 
>             diff --git a/arch/arm/boot/dts/omap5.dtsi
>             b/arch/arm/boot/dts/omap5.dtsi
>             index da41d70..a0de586 100644
>             --- a/arch/arm/boot/dts/omap5.dtsi
>             +++ b/arch/arm/boot/dts/omap5.dtsi
>             @@ -654,10 +654,11 @@
>                                      };
>                              };
> 
>             -               ocp2scp {
>             +               ocp2scp at 4a080000 {
>                                      compatible = "ti,omap-ocp2scp";
>                                      #address-cells = <1>;
>                                      #size-cells = <1>;
>             +                       reg = <0x4a080000 0x20>;
>                                      ranges;
>                                      ti,hwmods = "ocp2scp1";
>                                      usb2_phy: usb2phy at 4a084000 {
>             diff --git a/arch/arm/mach-omap2/omap___hwmod_54xx_data.c
>             b/arch/arm/mach-omap2/omap___hwmod_54xx_data.c
>             index 2435109..d9118a1 100644
>             --- a/arch/arm/mach-omap2/omap___hwmod_54xx_data.c
>             +++ b/arch/arm/mach-omap2/omap___hwmod_54xx_data.c
>             @@ -1105,6 +1105,42 @@ static struct omap_hwmod
>             omap54xx_mpu_hwmod = {
>                };
> 
>                /*
>             + * 'ocp2scp' class
>             + * bridge to transform ocp interface protocol to scp
>             (serial control port)
>             + * protocol
>             + */
>             +
>             +static struct omap_hwmod_class_sysconfig
>             omap54xx_ocp2scp_sysc = {
>             +       .rev_offs       = 0x0000,
>             +       .sysc_offs      = 0x0010,
>             +       .syss_offs      = 0x0014,
>             +       .sysc_flags     = (SYSC_HAS_AUTOIDLE |
>             SYSC_HAS_SIDLEMODE |
>             +                       SYSC_HAS_SOFTRESET |
>             SYSS_HAS_RESET_STATUS),
>             +       .idlemodes      = (SIDLE_FORCE | SIDLE_NO |
>             SIDLE_SMART),
>             +       .sysc_fields    = &omap_hwmod_sysc_type1,
>             +};
>             +
>             +static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
>             +       .name   = "ocp2scp",
>             +       .sysc   = &omap54xx_ocp2scp_sysc,
>             +};
>             +
>             +/* ocp2scp1 */
>             +static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
>             +       .name           = "ocp2scp1",
>             +       .class          = &omap54xx_ocp2scp_hwmod_class,
>             +       .clkdm_name     = "l3init_clkdm",
>             +       .main_clk       = "l4_root_clk_div",
>             +       .prcm = {
>             +               .omap4 = {
>             +                       .clkctrl_offs =
>             OMAP54XX_CM_L3INIT_OCP2SCP1___CLKCTRL_OFFSET,
>             +                       .context_offs =
>             OMAP54XX_RM_L3INIT_OCP2SCP1___CONTEXT_OFFSET,
>             +                       .modulemode   = MODULEMODE_HWCTRL,
>             +               },
>             +       },
>             +};
>             +
>             +/*
>                 * 'timer' class
>                 * general purpose timer module with accurate 1ms tick
>                 * This class contains several variants: ['timer_1ms',
>             'timer']
>             @@ -1900,6 +1936,14 @@ static struct omap_hwmod_ocp_if
>             omap54xx_l4_cfg__mpu = {
>                      .user           = OCP_USER_MPU | OCP_USER_SDMA,
>                };
> 
>             +/* l4_cfg -> ocp2scp1 */
>             +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
>             +       .master         = &omap54xx_l4_cfg_hwmod,
>             +       .slave          = &omap54xx_ocp2scp1_hwmod,
>             +       .clk            = "l4_root_clk_div",
>             +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
>             +};
>             +
>                /* l4_wkup -> timer1 */
>                static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
>                      .master         = &omap54xx_l4_wkup_hwmod,
>             @@ -2102,6 +2146,7 @@ static struct omap_hwmod_ocp_if
>             *omap54xx_hwmod_ocp_ifs[] __initdata = {
>                      &omap54xx_l4_per__mmc4,
>                      &omap54xx_l4_per__mmc5,
>                      &omap54xx_l4_cfg__mpu,
>             +       &omap54xx_l4_cfg__ocp2scp1,
>                      &omap54xx_l4_wkup__timer1,
>                      &omap54xx_l4_per__timer2,
>                      &omap54xx_l4_per__timer3,
>             --
>             1.8.2.1
> 
> 
> 
> 
> 
> -- 
> *Benoît Cousson*
> CTO
> BayLibre - Incubateur PACA Est
> Business Pole
> 1047 route des Dolines, Accès Allée Pierre Ziller, Entrée A
> 06560 Valbonne Sophia Antipolis




More information about the linux-arm-kernel mailing list