[PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property

[Tony Lindgren]

Benoit,

Care to take a look at this too?

* Lars Poeschel <larsi at wh2.tu-dresden.de> [130807 04:14]:
> From: Lars Poeschel <poeschel at lemonage.de>
> 
> Following commit ff5c9059 and therefore other omap platforms using
> the gpio-omap driver correct the #interrupt-cells property on am33xx
> too. The omap gpio binding documentaion also states that
> the #interrupt-cells property should be 2.
> 
> Signed-off-by: Lars Poeschel <poeschel at lemonage.de>
> ---
>  arch/arm/boot/dts/am33xx.dtsi |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 38b446b..033c5dd 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -102,7 +102,7 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> -			#interrupt-cells = <1>;
> +			#interrupt-cells = <2>;
>  			reg = <0x44e07000 0x1000>;
>  			interrupts = <96>;
>  		};
> @@ -113,7 +113,7 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> -			#interrupt-cells = <1>;
> +			#interrupt-cells = <2>;
>  			reg = <0x4804c000 0x1000>;
>  			interrupts = <98>;
>  		};
> @@ -124,7 +124,7 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> -			#interrupt-cells = <1>;
> +			#interrupt-cells = <2>;
>  			reg = <0x481ac000 0x1000>;
>  			interrupts = <32>;
>  		};
> @@ -135,7 +135,7 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> -			#interrupt-cells = <1>;
> +			#interrupt-cells = <2>;
>  			reg = <0x481ae000 0x1000>;
>  			interrupts = <62>;
>  		};
> -- 
> 1.7.10.4
>