[GIT PULL] ARM: OMAP: Device Tree for 3.12
Tony Lindgren
tony at atomide.com
Wed Aug 21 03:13:34 EDT 2013
Kevin & Olof,
Care to pull the below .dts changes directly from Benoit?
* Benoit Cousson <bcousson at baylibre.com> [130820 08:08]:
>
> Hi Tony,
>
> Please pull the following commits for OMAP Device Tree for v3.12.
>
> Thanks,
> Benoit
>
> ----------------------------------------------------------------
> Add the minimal DTS support for DRA7xx based SoC core.
> Add the initial support for N900 and gta04 phones.
> Do a lot of various cleanups.
> ----------------------------------------------------------------
>
> The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
>
> Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.12/dts
>
> for you to fetch changes up to 9f311a2325905043718da9bf649e2344b8df8473:
>
> ARM: dts: omap3-beagle: Make USB host pin naming consistent (2013-08-20 14:30:07 +0200)
>
> ----------------------------------------------------------------
> Afzal Mohammed (2):
> ARM: dts: AM4372: cpu(s) node per latest binding
> ARM: dts: AM4372: add few nodes
>
> Alexandre Belloni (1):
> ARM: dts: AM33XX: Add PMU support
>
> Javier Martinez Canillas (5):
> ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
> ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
> ARM: dts: omap3-igep0030: add mux conf for GPIO LED
> ARM: dts: AM33XX: use pinmux node defined in included file
> ARM: dts: AM33XX: don't redefine OCP bus and device nodes
>
> Kishon Vijay Abraham I (1):
> ARM: dts: omap5-uevm: Split SMPS10 in two nodes
>
> Lars Poeschel (1):
> ARM: dts: AM33xx: Correct gpio #interrupt-cells property
>
> Lee Jones (7):
> ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
> ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
> ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
> ARM: dts: Remove '0x's from OMAP3 DTS file
> ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
> ARM: dts: Remove '0x's from OMAP4 DTS file
> ARM: dts: Remove '0x's from OMAP5 DTS file
>
> Marek Belisko (1):
> ARM: dts: Add devicetree for gta04 board.
>
> Pavel Machek (1):
> ARM: dts: N900: Add device tree
>
> R Sricharan (1):
> ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
>
> Robert Nelson (1):
> ARM: dts: omap3-beagle-xm: fix string error in compatible property
>
> Roger Quadros (1):
> ARM: dts: omap3-beagle: Make USB host pin naming consistent
>
> Ruslan Bilovol (1):
> ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
>
> arch/arm/boot/dts/Makefile | 5 +-
> arch/arm/boot/dts/am335x-bone.dts | 217 ++++++-----
> arch/arm/boot/dts/am335x-evm.dts | 576 +++++++++++++++---------------
> arch/arm/boot/dts/am335x-evmsk.dts | 374 ++++++++++---------
> arch/arm/boot/dts/am33xx.dtsi | 13 +-
> arch/arm/boot/dts/am4372.dtsi | 347 ++++++++++++++++++
> arch/arm/boot/dts/dra7-evm.dts | 140 ++++++++
> arch/arm/boot/dts/dra7.dtsi | 575 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap2420-h4.dts | 6 +-
> arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
> arch/arm/boot/dts/omap3-beagle.dts | 24 +-
> arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++
> arch/arm/boot/dts/omap3-igep.dtsi | 2 +
> arch/arm/boot/dts/omap3-igep0020.dts | 19 +-
> arch/arm/boot/dts/omap3-igep0030.dts | 17 +-
> arch/arm/boot/dts/omap3-n900.dts | 92 +++++
> arch/arm/boot/dts/omap3.dtsi | 2 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 22 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +-
> arch/arm/boot/dts/omap4-sdp.dts | 21 +-
> arch/arm/boot/dts/omap4.dtsi | 2 +-
> arch/arm/boot/dts/omap5-uevm.dts | 13 +-
> arch/arm/boot/dts/omap5.dtsi | 4 +-
> arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++
> include/dt-bindings/pinctrl/dra.h | 50 +++
> 25 files changed, 2077 insertions(+), 673 deletions(-)
> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
> create mode 100644 arch/arm/boot/dts/dra7.dtsi
> create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
> create mode 100644 arch/arm/boot/dts/omap3-n900.dts
> create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
> create mode 100644 include/dt-bindings/pinctrl/dra.h
More information about the linux-arm-kernel
mailing list