[PATCH v2 4/7] ARM: dts: imx27 pinctrl

[Markus Pargmann]

Pinctrl driver node and pin group definitions for other driver nodes.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
 arch/arm/boot/dts/imx27.dtsi | 84 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 76cd89f..b9477d6 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
 
 / {
 	aliases {
@@ -235,6 +236,89 @@
 				status = "disabled";
 			};
 
+			iomuxc: iomuxc at 10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+
+				fec {
+					pinctrl_fec_1: fec-1 {
+						fsl,pins = <
+							MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+							MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+							MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+							MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+							MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+							MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+							MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+							MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+							MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+							MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+							MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+							MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+							MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+							MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+							MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+							MX27_PAD_ATA_DATA13__FEC_COL 0x0
+							MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+							MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+						>;
+					};
+				};
+
+				i2c {
+					pinctrl_i2c_1: i2c-1 {
+						fsl,pins = <
+							MX27_PAD_I2C_DATA__I2C_DATA 0x0
+							MX27_PAD_I2C_CLK__I2C_CLK 0x0
+						>;
+					};
+
+					pinctrl_i2c_2: i2c-2 {
+						fsl,pins = <
+							MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+							MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+						>;
+					};
+				};
+
+				owire {
+					pinctrl_owire_1: owire-1 {
+						fsl,pins = <
+							MX27_PAD_RTCK__OWIRE 0x0
+						>;
+					};
+				};
+
+				uart {
+					pinctrl_uart_1: uart-1 {
+						fsl,pins = <
+							MX27_PAD_UART1_TXD__UART1_TXD 0x0
+							MX27_PAD_UART1_RXD__UART1_RXD 0x0
+							MX27_PAD_UART1_CTS__UART1_CTS 0x0
+							MX27_PAD_UART1_RTS__UART1_RTS 0x0
+						>;
+					};
+
+					pinctrl_uart_2: uart-2 {
+						fsl,pins = <
+							MX27_PAD_UART2_TXD__UART2_TXD 0x0
+							MX27_PAD_UART2_RXD__UART2_RXD 0x0
+							MX27_PAD_UART2_CTS__UART2_CTS 0x0
+							MX27_PAD_UART2_RTS__UART2_RTS 0x0
+						>;
+					};
+
+					pinctrl_uart_3: uart-3 {
+						fsl,pins = <
+							MX27_PAD_UART3_TXD__UART3_TXD 0x0
+							MX27_PAD_UART3_RXD__UART3_RXD 0x0
+							MX27_PAD_UART3_CTS__UART3_CTS 0x0
+							MX27_PAD_UART3_RTS__UART3_RTS 0x0
+						>;
+					};
+				};
+			};
+
 			gpio1: gpio at 10015000 {
 				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 				reg = <0x10015000 0x100>;
-- 
1.8.4.rc3