[PATCH v2 1/3] can: mcp251x: Replace power callbacks with regulator API
Alexander Shiyan
shc_work at mail.ru
Mon Aug 19 07:39:19 EDT 2013
This patch replaces power callbacks to the regulator API. To improve
the readability of the code, helper for the regulator enable/disable
was added.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/mach-pxa/icontrol.c | 3 --
arch/arm/mach-pxa/zeus.c | 46 ++++++++++----------
drivers/net/can/mcp251x.c | 81 +++++++++++++++++++-----------------
include/linux/can/platform/mcp251x.h | 13 +-----
4 files changed, 69 insertions(+), 74 deletions(-)
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index fe31bfc..c98511c 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -73,9 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
static struct mcp251x_platform_data mcp251x_info = {
.oscillator_frequency = 16E6,
- .board_specific_setup = NULL,
- .power_enable = NULL,
- .transceiver_enable = NULL
};
static struct spi_board_info mcp251x_board_info[] = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f5d4364..04a0aea 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -29,6 +29,8 @@
#include <linux/i2c/pca953x.h>
#include <linux/apm-emulation.h>
#include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/suspend.h>
@@ -391,33 +393,34 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
};
/* CAN bus on SPI */
-static int zeus_mcp2515_setup(struct spi_device *sdev)
-{
- int err;
-
- err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
- if (err)
- return err;
+static struct regulator_consumer_supply can_regulator_consumer =
+ REGULATOR_SUPPLY("vdd", "spi3.0");
- err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
- if (err) {
- gpio_free(ZEUS_CAN_SHDN_GPIO);
- return err;
- }
+static struct regulator_init_data can_regulator_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = &can_regulator_consumer,
+ .num_consumer_supplies = 1,
+};
- return 0;
-}
+static struct fixed_voltage_config can_regulator_pdata = {
+ .supply_name = "CAN_SHDN",
+ .microvolts = 3300000,
+ .gpio = ZEUS_CAN_SHDN_GPIO,
+ .init_data = &can_regulator_init_data,
+};
-static int zeus_mcp2515_transceiver_enable(int enable)
-{
- gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
- return 0;
-}
+static struct platform_device can_regulator_device = {
+ .name = "reg-fixed-volage",
+ .id = -1,
+ .dev = {
+ .platform_data = &can_regulator_pdata,
+ },
+};
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
.oscillator_frequency = 16*1000*1000,
- .board_specific_setup = zeus_mcp2515_setup,
- .power_enable = zeus_mcp2515_transceiver_enable,
};
static struct spi_board_info zeus_spi_board_info[] = {
@@ -516,6 +519,7 @@ static struct platform_device *zeus_devices[] __initdata = {
&zeus_leds_device,
&zeus_pcmcia_device,
&zeus_max6369_device,
+ &can_regulator_device,
};
/* AC'97 */
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 8cda23b..3df83f8 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -37,9 +37,6 @@
*
* static struct mcp251x_platform_data mcp251x_info = {
* .oscillator_frequency = 8000000,
- * .board_specific_setup = &mcp251x_setup,
- * .power_enable = mcp251x_power_enable,
- * .transceiver_enable = NULL,
* };
*
* static struct spi_board_info spi_board_info[] = {
@@ -76,6 +73,7 @@
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/regulator/consumer.h>
/* SPI interface instruction set */
#define INSTRUCTION_WRITE 0x02
@@ -264,6 +262,8 @@ struct mcp251x_priv {
#define AFTER_SUSPEND_POWER 4
#define AFTER_SUSPEND_RESTART 8
int restart_tx;
+ struct regulator *power;
+ struct regulator *transceiver;
};
#define MCP251X_IS(_model) \
@@ -667,16 +667,25 @@ static int mcp251x_hw_probe(struct spi_device *spi)
return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
}
+static int mcp251x_power_enable(struct regulator *reg, int enable)
+{
+ if (IS_ERR(reg))
+ return 0;
+
+ if (enable)
+ return regulator_enable(reg);
+ else
+ return regulator_disable(reg);
+}
+
static void mcp251x_open_clean(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
- struct mcp251x_platform_data *pdata = spi->dev.platform_data;
free_irq(spi->irq, priv);
mcp251x_hw_sleep(spi);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(0);
+ mcp251x_power_enable(priv->transceiver, 0);
close_candev(net);
}
@@ -684,7 +693,6 @@ static int mcp251x_stop(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
- struct mcp251x_platform_data *pdata = spi->dev.platform_data;
close_candev(net);
@@ -704,8 +712,7 @@ static int mcp251x_stop(struct net_device *net)
mcp251x_hw_sleep(spi);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(0);
+ mcp251x_power_enable(priv->transceiver, 0);
priv->can.state = CAN_STATE_STOPPED;
@@ -939,8 +946,7 @@ static int mcp251x_open(struct net_device *net)
}
mutex_lock(&priv->mcp_lock);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(1);
+ mcp251x_power_enable(priv->transceiver, 1);
priv->force_quit = 0;
priv->tx_skb = NULL;
@@ -956,8 +962,7 @@ static int mcp251x_open(struct net_device *net)
flags, DEVICE_NAME, priv);
if (ret) {
dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(0);
+ mcp251x_power_enable(priv->transceiver, 0);
close_candev(net);
goto open_unlock;
}
@@ -1026,6 +1031,19 @@ static int mcp251x_can_probe(struct spi_device *spi)
CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
priv->model = spi_get_device_id(spi)->driver_data;
priv->net = net;
+
+ priv->power = devm_regulator_get(&spi->dev, "vdd");
+ priv->transceiver = devm_regulator_get(&spi->dev, "xceiver");
+ if ((PTR_ERR(priv->power) == -EPROBE_DEFER) ||
+ (PTR_ERR(priv->transceiver) == -EPROBE_DEFER)) {
+ ret = -EPROBE_DEFER;
+ goto error_power;
+ }
+
+ ret = mcp251x_power_enable(priv->power, 1);
+ if (ret)
+ goto error_power;
+
spi_set_drvdata(spi, priv);
priv->spi = spi;
@@ -1068,13 +1086,6 @@ static int mcp251x_can_probe(struct spi_device *spi)
}
}
- if (pdata->power_enable)
- pdata->power_enable(1);
-
- /* Call out to platform specific setup */
- if (pdata->board_specific_setup)
- pdata->board_specific_setup(spi);
-
SET_NETDEV_DEV(net, &spi->dev);
/* Configure the SPI bus */
@@ -1084,14 +1095,11 @@ static int mcp251x_can_probe(struct spi_device *spi)
/* Here is OK to not lock the MCP, no one knows about it yet */
if (!mcp251x_hw_probe(spi)) {
- dev_info(&spi->dev, "Probe failed\n");
+ ret = -ENODEV;
goto error_probe;
}
mcp251x_hw_sleep(spi);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(0);
-
ret = register_candev(net);
if (ret)
goto error_probe;
@@ -1109,13 +1117,13 @@ error_rx_buf:
if (!mcp251x_enable_dma)
kfree(priv->spi_tx_buf);
error_tx_buf:
- free_candev(net);
if (mcp251x_enable_dma)
dma_free_coherent(&spi->dev, PAGE_SIZE,
priv->spi_tx_buf, priv->spi_tx_dma);
+ mcp251x_power_enable(priv->power, 0);
+error_power:
+ free_candev(net);
error_alloc:
- if (pdata->power_enable)
- pdata->power_enable(0);
dev_err(&spi->dev, "probe failed\n");
error_out:
return ret;
@@ -1123,12 +1131,10 @@ error_out:
static int mcp251x_can_remove(struct spi_device *spi)
{
- struct mcp251x_platform_data *pdata = spi->dev.platform_data;
struct mcp251x_priv *priv = spi_get_drvdata(spi);
struct net_device *net = priv->net;
unregister_candev(net);
- free_candev(net);
if (mcp251x_enable_dma) {
dma_free_coherent(&spi->dev, PAGE_SIZE,
@@ -1138,8 +1144,9 @@ static int mcp251x_can_remove(struct spi_device *spi)
kfree(priv->spi_rx_buf);
}
- if (pdata->power_enable)
- pdata->power_enable(0);
+ mcp251x_power_enable(priv->power, 0);
+
+ free_candev(net);
return 0;
}
@@ -1163,15 +1170,14 @@ static int mcp251x_can_suspend(struct device *dev)
netif_device_detach(net);
mcp251x_hw_sleep(spi);
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(0);
+ mcp251x_power_enable(priv->transceiver, 0);
priv->after_suspend = AFTER_SUSPEND_UP;
} else {
priv->after_suspend = AFTER_SUSPEND_DOWN;
}
- if (pdata->power_enable) {
- pdata->power_enable(0);
+ if (!IS_ERR(priv->power))
+ regulator_disable(priv->power);
priv->after_suspend |= AFTER_SUSPEND_POWER;
}
@@ -1185,12 +1191,11 @@ static int mcp251x_can_resume(struct device *dev)
struct mcp251x_priv *priv = spi_get_drvdata(spi);
if (priv->after_suspend & AFTER_SUSPEND_POWER) {
- pdata->power_enable(1);
+ mcp251x_power_enable(priv->power, 1);
queue_work(priv->wq, &priv->restart_work);
} else {
if (priv->after_suspend & AFTER_SUSPEND_UP) {
- if (pdata->transceiver_enable)
- pdata->transceiver_enable(1);
+ mcp251x_power_enable(priv->transceiver, 1);
queue_work(priv->wq, &priv->restart_work);
} else {
priv->after_suspend = 0;
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
index 089fe43..8a27256 100644
--- a/include/linux/can/platform/mcp251x.h
+++ b/include/linux/can/platform/mcp251x.h
@@ -9,26 +9,15 @@
#include <linux/spi/spi.h>
-/**
+/*
* struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
* @oscillator_frequency: - oscillator frequency in Hz
* @irq_flags: - IRQF configuration flags
- * @board_specific_setup: - called before probing the chip (power,reset)
- * @transceiver_enable: - called to power on/off the transceiver
- * @power_enable: - called to power on/off the mcp *and* the
- * transceiver
- *
- * Please note that you should define power_enable or transceiver_enable or
- * none of them. Defining both of them is no use.
- *
*/
struct mcp251x_platform_data {
unsigned long oscillator_frequency;
unsigned long irq_flags;
- int (*board_specific_setup)(struct spi_device *spi);
- int (*transceiver_enable)(int enable);
- int (*power_enable) (int enable);
};
#endif /* __CAN_PLATFORM_MCP251X_H__ */
--
1.8.1.5
More information about the linux-arm-kernel
mailing list